LV100V Datasheet, PDF (1/5 Pages) Vishay Siliconix – Ceramic Disc Capacitors Class 1 and 2, 100 V (DC) General Purpose

LV 100 V
Vishay BCcomponents
Ceramic Disc Capacitors
Class 1 and 2, 100 V (DC) General Purpose
FEATURES
• Low losses
• High stability
• High capacitance in small size
• Kinked (preferred) or straight leads.
• Lead (Pb)-free available.
APPLICATIONS
• Bypassing
• Coupling
• Resonant circuit.
DESIGN
The capacitors consist of a ceramic disc both sides of which
are silver-plated. Connection leads are made of tinned
copper having a diameter of 0.6 mm.
The capacitors have inward kinked leads with a spacing of
5 mm (0.200") and a lead length from 4 to 30 mm.
Encapsulation is made of phenolic resin.
CAPACITANCE RANGE:
Class 1, at 1 MHz, 1.2 V (RMS); 1.0 to 100 pF
1 kHz, 1 ± 0.2V (RMS) for capacitance values higher than 1000 pF.
Class 2, at 1 kHz, 1 ± 0.2 V (RMS); 150 to 47000 pF
RATED DC VOLTAGE:
100 V
DIELECTRIC STRENGTH:
250 % of rated voltage
INSULATION RESISTANCE AT 100V (DC):
≥ 10000 MΩ
TOLERANCE ON CAPACITANCE:
± 0.25 pF; ± 0.5 pF; ± 5 % ; ± 10 %; ± 20 %; + 80 /- 20 %
D
tangent
line
SH
F
Capacitors with 5 mm (0.20") lead spacing.
TEMPERATURE COEFFICIENTS:
Class 1 NP0; SL0
Class 2 Y5P; Z5U; Y5V; Z5V
SECTIONAL SPECIFICATIONS:
Class 1 IEC 60 384-8,
Class 2 IEC 60 384-9,
EIA 198
CLIMATIC CATEGORY:
Class 1 55/125/21
Class 2 10/85/21 and 30/85/21
OPERATING TEMPERATURE RANGE:
Class 1 - 55 to + 125 °C
Class 2 - 30 to + 85 °C
DISSIPATION FACTOR:
Class 1, C ≤ 30 pF; ≤ 20 x (10/C + 0.7) x 10^-4 maximum
Class 1, C > 30 pF; ≤ 20 x 10^-4
Class 2, ≤ 3.0 %
MARKING
Marking indicates capacitance value and tolerance in
accordance with “EIA 198”.
The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient
temperature of 25 ± 3 °C, at normal atmospheric conditions
www.vishay.com
24
For technical questions contact: [e-mail]
Document Number: 28511
Revision: 23-Feb-05