|
LNS Datasheet, PDF (1/4 Pages) Vishay Siliconix – Low Value (0.03 to 10 ) Thin Film Resistor, Surface Mount Chip | |||
|
www.vishay.com
L-NS
Vishay Dale Thin Film
Low Value (0.03 ï to 10 ï)
Thin Film Resistor, Surface Mount Chip
Actual Size
0805
With extremely low resistances and high power capabilities,
Vishayâs proven and unique ultra-low value resistors can be
used in your hybrid or surface-mount applications. These
resistors are available with solderable or weldable
terminations.
CONSTRUCTION
Passivation
Resistor Film
Solder
Coating
Nickel Barrier
High Purity
Alumina
Adhesion Layer
FEATURES
⢠Homogeneous nickel alloy film
⢠No inductance for high-frequency applications
⢠Alumina substrates for high power handling
capability (2 W maximum power rating)
Available
⢠Pre-soldered or gold terminations
⢠Epoxy bondable termination available
Available
⢠Sulfur resistant (per ASTM B809-95 humid
vapor test)
Available
⢠Material categorization:ï
for definitions of compliance please see
www.vishay.com/doc?99912
Available
Noteï
* This datasheet provides information about parts that areï
RoHS-compliant and/or parts that are non-RoHS-compliant. Forï
example, parts with lead (Pb) terminations are not RoHS-compliant.ï
Please see the information/tables in this datasheet for details.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
300
1.0
VALUE AND MINIMUM TOLERANCE
VALUE (ï)
0.1
0.25
0.5
1.0
2.0
10.0
< 0.1
MINIMUM TOLERANCE
± 2.0 %
± 1.0 %
± 1.0 %
± 1.0 %
± 1.0 %
± 1.0 %
20 %
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
SPECIFICATIONS
Nickel alloy
0.03 ï to 10 ï
± 300 ppm/°C
1 % to 20 % (value dependent)
-
-
-
Working Voltage
PxR
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
-55 °C to +155 °C
-55 °C to +155 °C
< -35 dB (typical)
-
CONDITIONS
-
-
-55 °C to +125 °C
-
-
-
-
-
-
-
-
-
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING (mW)
0505
125
0508
400
0603
125
0612
500
0705/0805
200
1005
1020
1206
250
1000
330
1225
1505
2010
2000
500
1000
2512
2000
Notes
⢠Resistor values beyond ranges shall be reviewed by the factory
(1) 0705 and 0805 are the same (only use 0805 when ordering)
RESISTANCE RANGE (ï)
0.05 to 5.0
0.03 to 2.0
0.10 to 5.0
0.05 to 2.5
0.10 to 6.0
0.15 to 10.0
0.03 to 3.0
0.10 to 10.0
0.03 to 2.6
0.25 to 10.0
0.17 to 10.0
0.18 to 10.0
Revision: 13-Mar-15
1
Document Number: 60027
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |