LH1546AT-E3 Datasheet, PDF (1/9 Pages) Vishay Siliconix – 1 Form A Solid State Relay

LH1546AT-E3/AAB-E3/AABTR-E3
Vishay Semiconductors
1 Form A Solid State Relay
Features
• Current Limit Protection
• Isolation Test Voltage 5300 V_RMS
• Typical R_ON 28 Ω
• Load Voltage 350 V
• Load Current 120 mA
• High Surge Capability
• Clean Bounce Free Switching
• Low Power Consumption
• High Reliability Monolithic Receptor
• SMD lead available on tape and reel
• Equivalent to CP Clare LCA110
• Lead-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J,
Double Protection
• CSA - Certification 093751
• BSI/BABT Cert. No. 7980
• FIMKO Approval
Applications
General Telecom Switching
- On/off Hook Control
- Ring Delay
- Dial Pulse
- Ground Start
- Ground Fault Protection
Instrumentation
Industrial Controls
See "Solid State Relays" (Application Note 56)
DIP
SMD
S DC S'
6
5
4
S
S'
i179001
1
2
3
Description
The LH1546 is robust, ideal for telecom and ground
fault applications. It is a SPST normally open switch
(1 Form A) that replaces electromechanical relays in
many applications. It is constructed using a GaAIAs
LED for actuation control and an integrated monolithic
die for the switch output. The die, fabricated in a high-
voltage dielectrically isolated technology, is com-
prised of a photodiode array, switch control circuitry
and MOSFET switches. In addition, it employs cur-
rent-limiting circuitry which meets FCC 68.302 and
other regulatory voltage surge requirements when
overvoltage protection is provided.
Customer Specific Requirement
- Order information has been changed to identify that
the product is lead free.
Order Information
Part
LH1546AAB-E3
LH1546AABTR-E3
LH1546AT-E3
Remarks
Tubes, SMD-6
Tape and Reel, SMD-6
Tubes, DIP-6
Document Number 84600
Rev. 1.0, 09-Aug-04
www.vishay.com
1