LH1540AAB_11 Datasheet, PDF (1/8 Pages) Vishay Siliconix – 1 Form A Solid-State Relay

www.vishay.com
LH1540AAB, LH1540AABTR, LH1540AT
Vishay Semiconductors
1 Form A Solid-State Relay
SMD
DIP
S
S'
S
DC
S'
6
5
4
i179041-2
1
2
3
DESCRIPTION
The LH1540 is robust, ideal for telecom and ground fault
applications. It is an SPST normally open switch (form A)
that replaces electromechanical relays in many applications.
It is constructed using a GaAIAs LED for actuation control
and an integrated monolithic die for the switch output. The
die, fabricated in a high-voltage dielectrically isolated
technology, is comprised of a photodiode array, switch
control circuitry and MOSFET switches. In addition, it
employs current-limiting circuitry which meets lightning
surge testing as per ANSI/TIA-968-B and other regulatory
voltage surge requirements when overvoltage protection is
provided.
FEATURES
• Current limit protection
• Isolation test voltage 5300 V_RMS
• Typical R_ON 20 , max. 25 
• Load voltage 350 V
• Load current 120 mA
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
• Instrumentation
• Industrial controls
Note
• See “solid-state relays” (application note 56)
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double protection
CSA: certification no. 093751
BSI:
certification no. 7979/7980
FIMKO: 25419
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
ORDERING INFORMATION
L
H
1
5
4
PART NUMBER
PACKAGE
SMD-6
SMD-6, tape and reel
DIP-6, thru hole
0
#
#
#
ELECTR. PACKAGE
VARIATION CONFIG.
T
R
DIP
TAPE AND
REEL
7.62 mm
UL, CSA, BSI, FIMKO
LH1540AAB
LH1540AABTR
LH1540AT
SMD
> 0.1 mm
Rev. 1.9, 25-Jul-11
1
Document Number: 83833
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000