LH1535AAB Datasheet, PDF (1/9 Pages) Vishay Siliconix – 1 Form A Solid-State Relay

www.vishay.com
LH1535AAB, LH1535AT
Vishay Semiconductors
1 Form A Solid-State Relay
SMD
DIP
S
S'
S
DC
S'
6
5
4
i179041-2
1
2
3
DESCRIPTION
The LH1535 is robust, ideal for telecom and ground fault
applications. It is an SPST normally open switch (form A)
that replaces electromechanical relays in many applications.
It is constructed using a GaAIAs LED for actuation control
and an integrated monolithic die for the switch output. The
die, fabricated in a high-voltage dielectrically isolated
technology, is comprised of a photodiode array, switch
control circuitry and MOSFET switches. In addition, it
employs current-limiting circuitry which meets lightning
surge testing as per ANSI/TIA-968-B and other regulatory
voltage surge requirements when overvoltage protection is
provided.
FEATURES
• Current limit protection
• Isolation test voltage 5300 V_RMS
• Typical R_ON 20 Ω, max. 25 Ω
• Load voltage 400 V
• Load current 120 mA
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• General telecom switching
• Instrumentation
• Industrial controls
Note
• See “solid-state relays” (application note 56)
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double protection
CSA: certification no. 093751
FIMKO: 25419
ORDERING INFORMATION
L
H
1
5
3
PART NUMBER
PACKAGE
SMD-6
DIP-6, thru hole
5
#
#
#
ELECTR. PACKAGE
VARIATION CONFIG.
T
R
TAPE AND
REEL
DIP
7.62 mm
UL, CSA, FIMKO
LH1535AAB
LH1535AT
SMD
> 0.1 mm
Rev. 1.9, 04-Mar-14
1
Document Number: 83870
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000