LH1532AAC_11 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Dual 1 Form A Solid-State Relay

www.vishay.com
LH1532AAC, LH1532AACTR, LH1532AB
Vishay Semiconductors
Dual 1 Form A Solid-State Relay
DIP
SMD
S1
S1'
S2
S2'
S1
S1' S2
S2'
87
65
i179034_2
1 ^i179034_9
23
4
DVE
DESCRIPTION
The LH1532 dual 1 form A relays are SPST normally open
switches that can replace electromechanical relays in many
applications. They are constructed using a GaAIAs LED for
actuation control and an integrated monolithic die for the
switch output.
The die, fabricated in a high-voltage dielectrically isolated
technology is comprised of a photodiode array, switch
control circuitry, and MOSFET switches. In addition, the
LH1532 SSRs employ current-limiting circuitry, enabling
them to pass lightning surge testing as per ANSI/TIA-968-B
and other regulatory surge requirements when overvoltage
protection is provided.
FEATURES
• Dual channel (LH1540)
• Current limit protection
• Isolation test voltage 5300 V_RMS
• Typical R_ON 20 
• Load voltage 350 V
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
- On/off hook control
- Ring delay
- Dial pulse
- Ground start
- Ground fault protection
• Instrumentation
• Industrial controls
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double
protection
CSA:
certification no. 093751
BSI/BABT: certification no. 7980
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: approval
ORDERING INFORMATION
L
H
1
5
3
PART NUMBER
PACKAGE
SMD-8, tubes
SMD-8, tape and reel
DIP-8, tubes
2
A
#
#
ELECTR. PACKAGE
VARIATION CONFIG.
T
R
DIP
TAPE AND
REEL
7.62 mm
UL, CSA, BSI, FIMKO
LH1532AAC
LH1532AACTR
LH1532AB
SMD
> 0.1 mm
Rev. 1.6, 25-Jul-11
1
Document Number: 83829
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000