|
LH1525AT Datasheet, PDF (1/9 Pages) Infineon Technologies AG – 1 Form A Solid-State Relays | |||
|
VISHAY
1 Form A Solid State Relays
LH1525AT/ AAB/ AABTR
Vishay Semiconductors
Features
⢠Extremely Low Operating Current
⢠High-speed Operation
⢠Isolation Test Voltage 5300 VRMS
⢠Current-limit Protection
⢠High Surge Capability
⢠dc-only Option
⢠Clean, Bounce-free Switching
⢠Low Power Consumption
⢠High-reliability Monolithic Receptor
⢠Surface-mountable
Agency Approvals
⢠UL - File No. E52744
⢠CSA - Certification 093751
⢠BSI/BABT Cert. No. 7980
⢠FIMKO Approval
Applications
General Telecom Switching
- Telephone Line Interface
- On/off Hook
- Ring Relay
- Break Switch
- Ground Start
Battery-powered Switch Applications
Industrial Controls
- Microprocessor Control of Solenoids,
Lights, Motors, Heaters, etc.
Programmable Controllers
Instrumentation
See "Solid State Relays" (Appnote 56)
DIP
SMD
S DC S'
6
5
4
S
S'
i179001
1
2
3
Description
The LH1525 relay are SPST normally open switches
(1 Form A) that can replace electromechanical relays
in many applications. The relay requires a minimal
amount of LED drive current to operate, making it
ideal for battery powered and power consumption
sensitive applications. The relay is constructed using
a GaAIAs LED for actuation control and an integrated
monolithic die for the switch output. The die, fabri-
cated in a high-voltage dielectrically isolated technol-
ogy, comprised of a photodiode array, switch-control
circuitry, and MOSFET switches. In addition, the relay
employs current-limiting circuitry, enabling it to pass
FCC 68.302 and other regulatory surge requirements
when overvoltage protection is provided. The relay
can be configured for ac/dc or dc-only operation.
Order Information
Part
LH1525AAB
LH1525AABTR
LH1525AT
Remarks
Tubes, SMD-6
Tape and Reel, SMD-6
Tubes, DIP-6
Document Number 83823
Rev. 1.3, 14-Jul-04
www.vishay.com
1
|
▷ |