LH1510AAB_11 Datasheet, PDF (1/9 Pages) Vishay Siliconix – 1 Form A Solid-State Relay

www.vishay.com
LH1510AAB, LH1510AABTR, LH1510AT
Vishay Semiconductors
1 Form A Solid-State Relay
SMD
DIP
S
S'
S
DC S'
6
5
4
i179041-2
1
2
3
DESCRIPTION
The LH1510 is an SPST normally open switch (1 form A) that
can replace electromechanical relays in many applications.
The relay is constructed using a GaAlAs LED for actuation
control and an integrated monolithic die for the switch
output. The die, fabricated in a high-voltage dielectrically
isolated technology, is comprised of a photodiode array,
switch control circuity, and MOSFET switches. In addition,
the relay employs current-limiting circuity enabling it to pass
lightning surge testing as per ANSI/TIA-968-B and other
regulatory voltage surge requirements when overvoltage
protection is provided. The LH1510 is the only relay in the
family that provides current limiting for unidirectional DC
applications.
FEATURES
• Isolation test voltage 5300 V_RMS
• Current limit protection built in
• High reliability monolithic output die
• Low power consumption
• Clean bounce free switching
• High surge capability
• Surface mountable
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
• Instrumentation
• Industrial controls
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double protection
CSA: certification no. 093751
BSI:
certification no. 7979/7980
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: 25419
ORDERING INFORMATION
DIP
SMD
L
H
1
5
1
0
#
#
#
T
R
PART NUMBER
PACKAGE
SMD-6, tubes
SMD-6, tape and reel
DIP-6, tubes
ELECTR. PACKAGE
VARIATION CONFIG.
TAPE AND
REEL
7.62 mm
UL, CSA, BSI, FIMKO
LH1510AAB
LH1510AABTR
LH1510AT
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
INPUT
LED continuous forward current
LED reverse voltage
OUTPUT
I_F
I_R  10 μA
V_R
DC or peak AC load voltage
I_L  50 μA
V_L
Continuous DC load current - bidirectional
operation
I_L
Continuous DC load current - unidirectional
operation
I_L
Peak load current (single shot)
t = 100 ms
I_P
VALUE
50
8
200
200
350
(1)
> 0.1 mm
UNIT
mA
V
V
mA
mA
Rev. 1.7, 25-Jul-11
1
Document Number: 83810
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000