LH1510AAB Datasheet, PDF (1/10 Pages) Vishay Siliconix – 1 Form A Solid State Relay

1 Form A Solid State Relay
LH1510AAB/ AABTR/ AT
Vishay Semiconductors
Features
• Isolation Test Voltage 5300 V_RMS
• Current-limit Protection Built-in
• High-reliability Monolithic output die
• Low Power Consumption
• Clean, Bounce-free Switching
• High Surge Capability
• Surface Mountable
• Lead-free component
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
Agency Approvals
• UL1577, File No. E52744 System Code H or J,
Double Protection
• CSA - Certification 093751
• BSI/BABT Cert. No. 7980
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
• FIMKO Approval
Applications
General Telecom Switching
- On/off-hook
- Ring Relay/ Dial Pulse
- Ground Start/ Fault Protection
Instrumentation
- Automatic Tuning/Balancing
- Flying Capacitor
- Analog Multiplex
Industrial Controls
- Triac Predrivers
- Output Modules
DIP
SMD
S DC S'
6
54
S
S'
i179001
1
2
3
e3 Pb
Pb-free
Peripherals - Transducer Driver
Description
The LH1510 is a SPST normally open switch (1 Form
A) that can replace electromechanical relays in many
applications. The relay is constructed using a GaAlAs
LED for actuation control and an integrated monolithic
die for the switch output. The die, fabricated in a high-
voltage dielectrically isolated technology, is com-
prised of a photodiode array, switch control circuity,
and MOSFET switches. In addition, the relay employs
current-limiting circuity enabling it to pass FCC
68.302 and other regulatory voltage surge require-
ments when overvoltage protection is provided. The
LH1510 is the only relay in the family that provides
current limiting for unidirectional dc applications.
Order Information
Part
LH1510AAB
LH1510AABTR
LH1510AT
Remarks
Tubes, SMD-6
Tape and Reel, SMD-6
Tubes, DIP-6
Document Number 83810
Rev. 1.3, 26-Oct-04
www.vishay.com
1