LH1500AAB_11 Datasheet, PDF (1/8 Pages) Vishay Siliconix – 1 Form A Solid-State Relay

www.vishay.com
LH1500AAB, LH1500AABTR, LH1500AT
Vishay Semiconductors
1 Form A Solid-State Relay
SMD
DIP
S
S'
S
DC
S'
6
5
4
1
2
3
i179041-2
DESCRIPTION
The LH1500 is robust, ideal for telecom and ground fault
applications. It is an SPST normally open switch (1 form A)
that replaces electromechanical relays in many applications.
It is constructed using a GaAIAs LED for actuation control
and an integrated monolithic die for the switch output. The
die, fabricated in a high-voltage dielectrically isolated
technology, is comprised of a photodiode array, switch
control circuitry and MOSFET switches. In addition, it
employs current-limiting circuitry which meets lightning
surge testing as per ANSI/TIA-968-B and other regulatory
voltage surge requirements when overvoltage protection is
provided.
FEATURES
• Current limit protection
• Isolation test voltage 5300 V_RMS
• Typical R_ON 20 
• Load voltage 350 V
• Load current 150 mA
• High surge capability
• Clean bounce free switching
• Low power consumption
• SMD lead available on tape and reel
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
• General telecom switching
• Instrumentation
• Industrial controls
AGENCY APPROVALS
UL1577: file no. E52744 system code H, double protection
CSA: certification 093751
BSI:
no. 7979 and 7980
FIMKO: 25419
ORDERING INFORMATION
L
H
1
5
0
PART NUMBER
PACKAGE
SMD-6
SMD-6, tape and reel
DIP-6, thru hole
0
#
#
#
ELECTR. PACKAGE
VARIATION CONFIG.
T
R
DIP
TAPE AND
REEL
7.62 mm
UL, CSA, BSI, FIMKO
LH1500AAB
LH1500AABTR
LH1500AT
SMD
> 0.1 mm
Rev. 2.0, 25-Jul-11
1
Document Number: 83804
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000