L Datasheet, PDF (1/5 Pages) Bi technologies – Resistor Networks

www.vishay.com
L
Vishay Sfernice
SMD Wraparound Ultra Low Value Thin Film Resistors
With extremely low resistance and high power capabilities,
these ultra low value resistors are available with solderable
or weldable terminations.
FEATURES
• NiCr + Ta₂O₅ resistive layer
• Pre-soldered or gold terminations
• No inductance for high frequency applications
• Alumina substrates for high power handling
capability
• Resistance range: 0.1  to 9.99 
Available
Available
• TCR down to 50 ppm/°C
Available
• Power rating: Up to 2 W at + 70 °C
• Withstand AEC-Q200 humidity test
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE RANGE

RATED POWER
P_{70 °C}
W
L0603
0603
0.1 to 9.99
0.125
L0805
0805
0.1 to 9.99
0.2
L1206
1206
0.1 to 9.99
0.33
L1505
1505
0.1 to 9.99
0.5
L2010
L2512
2010
2512
0.1 to 9.99
0.1 to 9.99
1.0
2.0 ⁽¹⁾
Note
(1) _{With special assembly care}
LIMITING ELEMENT
VOLTAGE
V
50
50
50
50
50
50
TOLERANCE
±%
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
1, 2, 3, 5, 10
TEMPERATURE
COEFFICIENT
± ppm/°C
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
50, 100, 200, 300
CLIMATIC SPECIFICATIONS
Operating temperature
range
- 55 °C; + 155 °C
MECHANICAL SPECIFICATIONS
Substrate
Alumina
Technology
Coating
Terminations
NiCr + Ta₂O₅
Silicone
Solderable
B type: SnPb over nickel barrier
N type: SnAg over nickel barrier
G type: Gold over nickel barrier
Note
• Refer to Application Note “Guidelines for Vishay Sfernice
Resistive and Inductive Components” (document number:
52029) for recommended reflow profile. Profile #3 applies.
TOLERANCE AND TCR VS. OHMIC VALUE
OHMIC VALUE
RANGE in 
TIGHTEST
TOLERANCE
(%)
BEST
TCR
(ppm/°C)
TERMINATIONS
0R1 < 0R25
1
300
N or B
0R25 < 0R5
1
200
N or B
0R5 < 2R5
1
100
N or B
2R5 < 9R99
1
50
N or B
0R1 < 0R25
5
300
G
0R25 < 0R5
5
200
G
0R < 1R
5
100
G
1R < 2R5
3
100
G
2R5 to 9R99
3
50
G
Revision: 04-Sep-14
1
Document Number: 53018
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000