KP1836 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Polypropylene Film Capacitors Related Document: IEC 60384-17 Grade 1.2

KP 1836
Vishay Roederstein
Polypropylene Film Capacitors
Related Document: IEC 60384-17 Grade 1.2
MAIN APPLICATIONS:
High voltage, very high current and high pulse operations,
deflection circuits in TV sets (fly-back tuning). Electronic
ballasts, protection circuits in SMPS’s. Snubber and SCR
commutating circuits.
MARKING:
Manufacturer's logo/type/C-value/rated voltage/tolerance/
data of manufacture
DIELECTRIC:
Polypropylene film
ELECTRODES:
Aluminum foil
COATING:
Flame retardant plastic case (UL-class 94 V-0), blue,
epoxy resin sealed
Flame class B according to IEC 60065 available on request
CONSTRUCTION:
Extended aluminum foil, internal series connection,
double-sided metallized, polyester carrier film (refer to
general information)
LEADS:
Tinned wire
IEC TEST CLASSIFICATION:
55/100/56 according to IEC 60068
OPERATING TEMPERATURE RANGE:
- 55°C to + 100°C
CAPACITANCE RANGE:
100pF to 0.22µF
CAPACITANCE TOLERANCES:
± 10% (K), ± 5% (J)
RATED VOLTAGES (U_R):
630 VDC, 1000 VDC, 1250 VDC, 1600 VDC, 2000 VDC
PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz:
300 VAC, 350 VAC, 400 VAC, 500 VAC, 600 VAC
TEST VOLTAGE (ELECTRODE/ELECTRODE)
2 x U_R for 2 s
INSULATION RESISTANCE:
Measured at 500 VDC after one minute
100,000 MΩ minimum value, (1000 GΩ typical value)
Dimensions in millimeters
L
Max.
W
Max.
Marking
H
Max.
0.6
pcm
± 0.4
Ød
± 0.4
6.0^-1
W
Ød
≥ 16
1.0
< 16.0
0.8
TEMPERATURE COEFFICIENT:
- 250 x 10^-6/°C (typical value)
CAPACITANCE DRIFT:
Up to + 40°C, ± 0.5% for a period of two years
DERATING FOR DC AND AC.
CATEGORY VOLTAGE U_C:
At + 85°C: U_C = 1.0 U_R
At + 100°C: U_C = 0.7 U_R
SELF INDUCTANCE:
~ 6 nH measured with 2mm long leads
PULL TEST ON LEADS:
≥ 30 N in direction of leads according to IEC 60068-2-21
RELIABILITY:
Operational life > 300,000 h
Failure rate < 1 FIT (0.5 x U_R and 40°C)
For further details, please refer to the general information
provided in this catalog.
MAXIMUM PULSE RISE TIME
PCM
Maximum pulse rise time d_v/d_t [V/µs]
(mm)
630 VDC
1000 VDC
1250 VDC
1600 VDC
2000 VDC
15
6500
8200
11,100
13,900
13,900
22.5
2600
3200
4600
6000
9800
27.5
1800
2300
3100
4000
6000
37.5
1200
1500
1900
2400
3500
If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted.
DISSIPATION FACTOR TAN δ
MEASURED AT
C ≤ 0.1µF
C > 0.1µF
1kHz
10kHz
100kHz
0.3 x 10^-3
0.4 x 10^-3
1 x 10^-3
Maximum values
0.3 x 10^-3
0.4 x 10^-3
—
Document Number 26021
Revision 11-Jun-02
For technical questions, contact [e-mail]
www.vishay.com
61