IRFI830G Datasheet, PDF (1/8 Pages) International Rectifier – Power MOSFET(Vdss=500V, Rds(on)=1.5ohm, Id=3.1A)

Power MOSFET
IRFI830G, SiHFI830G
Vishay Siliconix
PRODUCT SUMMARY
V_DS (V)
R_DS(on) (Ω)
Q_g (Max.) (nC)
Q_gs (nC)
Q_gd (nC)
Configuration
500
V_GS = 10 V
1.5
38
5.0
22
Single
D
TO-220 FULLPAK
G
GDS
S
N-Channel MOSFET
ORDERING INFORMATION
Package
Lead (Pb)-free
SnPb
FEATURES
• Isolated Package
• High Voltage Isolation = 2.5 kV_RMS (t = 60 s; ^Available
f = 60 Hz)
RoHS*
• Sink to Lead Creepage Distance = 4.8 mm
COMPLIANT
• Dynamic dV/dt Rating
• Low Thermal Resistance
• Lead (Pb)-free Available
DESCRIPTION
Third generation Power MOSFETs from Vishay provide the
designer with the best combination of fast switching,
ruggedized device design, low on-resistance and
cost-effectiveness.
The TO-220 FULLPAK eliminates the need for additional
insulating hardware in commercial-industrial applications.
The molding compound used provides a high isolation
capability and a low thermal resistance between the tab and
external heatsink. This isolation is equivalent to using a 100
micron mica barrier with standard TO-220 product. The
FULLPAK is mounted to a heatsink using a single clip or by
a single screw fixing.
TO-220 FULLPAK
IRFI830GPbF
SiHFI830G-E3
IRFI830G
SiHFI830G
ABSOLUTE MAXIMUM RATINGS T_C = 25 °C, unless otherwise noted
PARAMETER
SYMBOL
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current
Pulsed Drain Current^a
Linear Derating Factor
Single Pulse Avalanche Energy^b
Repetitive Avalanche Current^a
Repetitive Avalanche Energy^a
Maximum Power Dissipation
Peak Diode Recovery dV/dt^c
V_GS at 10 V
T_C = 25 °C
T_C = 100 °C
T_C = 25 °C
V_DS
V_GS
I_D
I_DM
E_AS
I_AR
E_AR
P_D
dV/dt
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)
for 10 s
T_J, T_stg
Mounting Torque
6-32 or M3 screw
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. V_DD = 50 V, starting T_J = 25 °C, L = 33 mH, R_G = 25 Ω, I_AS = 3.1 A (see fig. 12).
c. I_SD ≤ 3.1 A, dI/dt ≤ 75 A/µs, V_DD ≤ V_DS, T_J ≤ 150 °C.
d. 1.6 mm from case.
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 91159
S-Pending-Rev. A, 23-Jun-08
WORK-IN-PROGRESS
LIMIT
500
± 20
3.1
2.0
12
0.28
180
3.1
3.5
35
3.5
- 55 to + 150
300^d
10
1.1
UNIT
V
A
W/°C
mJ
A
mJ
W
V/ns
°C
lbf · in
N·m
www.vishay.com
1