IRFBC40LC Datasheet, PDF (1/8 Pages) International Rectifier – HEXFET-R POWER MOSFET

IRFBC40LC, SiHFBC40LC
Vishay Siliconix
Power MOSFET
PRODUCT SUMMARY
V_DS (V)
R_DS(on) (Ω)
Q_g (Max.) (nC)
Q_gs (nC)
Q_gd (nC)
Configuration
600 V
V_GS = 10 V
1.2
39
10
19
Single
D
TO-220
S
D
G
G
S
N-Channel MOSFET
ORDERING INFORMATION
Package
Lead (Pb)-free
SnPb
FEATURES
• Ultra Low Gate Charge
• Reduced Gate Drive Requirement
• Enhanced 30 V, V_GS Rating
• Reduced C_iss, C_oss, C_rss
• Extremely High Frequency Operation
• Repetitive Avalanche Rated
• Lead (Pb)-free Available
Available
RoHS*
COMPLIANT
DESCRIPTION
This new series of low charge Power MOSFETs achieve
significantly lower gate charge over conventional Power
MOSFETs. Utilizing the new LCDMOS technology, the
device improvements are achieved without added product
cost, allowing for reduced gate drive requirements and total
system savings. In addition reduced switching losses and
improved efficiency are achievable in a variety of high
frequency applications. Frequencies of a few MHz at high
current are possible using the new low charge Power
MOSFETs.
These device improvements combined with the proven
ruggedness and reliability that are characteristic of Power
MOSFETs offer the designer a new standard in power
transistors for switching applications.
TO-220
IRFBC40LCPbF
SiHFBC40LC-E3
IRFBC40LC
SiHFBC40LC
ABSOLUTE MAXIMUM RATINGS T_C = 25 °C, unless otherwise noted
PARAMETER
SYMBOL
Gate-Source Voltage
Continuous Drain Current
Pulsed Drain Current^a
Linear Derating Factor
Single Pulse Avalanche Energy^b
Repetitive Avalanche Current^a
Repetitive Avalanche Energy^a
Maximum Power Dissipation
Peak Diode Recovery dV/dt^c
V_GS at 10 V
T_C = 25 °C
T_C = 100 °C
T_C = 25 °C
V_GS
I_D
I_DM
E_AS
I_AR
E_AR
P_D
dV/dt
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)
for 10 s
T_J, T_stg
Mounting Torque
6-32 or M3 screw
Notes
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11).
b. V_DD = 50 V, starting T_J = 25 °C, L = 25 mH, R_G = 25 Ω, I_AS = 6.2 A (see fig. 12).
c. I_SD ≤ 6.2 A, dI/dt ≤ 80 A/µs, V_DD ≤ V_DS, T_J ≤ 150 °C.
d. 1.6 mm from case.
* Pb containing terminations are not RoHS compliant, exemptions may apply
LIMIT
± 30
6.2
3.9
25
1.0
530
6.2
13
125
3.0
- 55 to + 150
300^d
10
1.1
UNIT
V
A
W/°C
mJ
A
mJ
W
V/ns
°C
lbf · in
N·m
Document Number: 91114
S-81567-Rev. A, 28-Jul-08
www.vishay.com
1