IMS-2SWWD-30 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Inductors

IMS-2SWWD-30
Vishay Dale
Inductors
Commercial, Subminiature, Molded, Shielded
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 10 % on Q-Meter at specified
frequency
Dielectric Strength: 700 VRMS at sea level
Operating Temperature: - 55 °C to + 105 °C
Self-Resonant Frequency: Measured per MIL-PRF-15305
Q: Measured on a Q-Meter at specified frequency
Rating: Maximum based on 1/3 watt dissipation
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets five pound pull test; three 360°
rotations in alternate directions per MIL-PRF-15305 (latest
revision)
FEATURES
• Classification is Grade 1, Class A
• Ultra-reliable molded shielded inductor
• Inductance range is 0.10 µH to 10 000 µH
RoHS
COMPLIANT
• 0.136" [3.45 mm] diameter by 0.335" [8.51 mm] length
• Molded epoxy envelope
• Subminiature size for high density circuits and high
inductance-to-size ratio
• Utmost reliability, electrical performance and minimum
coupling in high density packaging
DENSITY SPECIFICATIONS
Weight: 0.50 gram maximum
Shielding: Less than 3 % coupling with two units mounted
side by side at 1000 cycles
ENVIRONMENTAL SPECIFICATIONS
Moisture: Meets requirements of MIL-PRF-15305
Vibration: High frequency, 10 Hz to 2000 Hz at 20 g ± 10 %
maximum for 12 logarithmic swings each of 20 minute
duration repeated for each of three mutually perpendicular
planes
Shock: 100 g, 6 ms
DIMENSIONS in inches [millimeters]
1.438 ± 0.188
[36.52 ± 4.78]
#24 0.020 ± 0.002
[0.508 ± 0.051]
TCW
0.335 ± 0.010
[8.51 ± 0.254]
0.145 [3.68]
Max.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND.
(µH)
TOL.
Q
MIN.
TEST FREQ.
MIN.
(MHz)
SELF- RESONANT DCR
FREQ. MIN.
MAX.
(MHz)
(Ohms)
RATED DC
CURRENT
(mA)
IMS-2SWWD-3 0.10 ± 10 % 42
25
IMS-2SWWD-3 0.12 ± 10 % 42
25
IMS-2SWWD-3 0.15 ± 10 % 42
25
IMS-2SWWD-3 0.18 ± 10 % 42
25
IMS-2SWWD-3 0.22 ± 10 % 42
25
IMS-2SWWD-3 0.27 ± 10 % 42
25
IMS-2SWWD-3 0.33 ± 10 % 42
25
IMS-2SWWD-3 0.39 ± 10 % 42
25
IMS-2SWWD-3 0.47 ± 10 % 41
25
IMS-2SWWD-3 0.56 ± 10 % 39
25
IMS-2SWWD-3 0.68 ± 10 % 36
25
IMS-2SWWD-3 0.82 ± 10 % 35
25
480
0.087
1038
460
0.090
1021
400
0.098
978
360
0.117
895
340
0.141
815
320
0.157
773
295
0.178
726
275
0.208
671
250
0.257
604
238
0.283
576
224
0.337
527
205
0.470
447
* Incremental Current: The DC current required to cause a 5 % reduction in the nominal inductance value
Document Number: 34046
Revision: 10-Aug-06
For technical questions contact [e-mail]
INCREMENTAL*
CURRENT
(mA)
> 1650
> 1630
> 1550
> 1420
> 1330
> 1230
> 1140
> 1060
> 960
> 915
> 840
> 720
www.vishay.com
19