IM Datasheet, PDF (1/7 Pages) Vishay Siliconix – Inductors

IM
Vishay Dale
Inductors
Commercial, Molded
INDUCTANCE RANGE AND MILITARY STANDARD
MODEL
INDUCTANCE RANGE
FROM
TO
IM-1
IM-2
IM-4
IM-6
IM-8
IM-9
IM-10
0.10 µH
0.022 µH
0.10 µH
1.2 µH
33 µH
0.15 µH
5.6 µH
36 µH
270 µH
0.10 µH
3.3 µH
33 µH
270 µH
1100 µH
68 µH
3900 µH
100 µH
0.082 µH
1 µH
27 µH
1000 µH
4.7 µH
33 µH
240 µH
1800 µH
2.7 µH
27 µH
220 µH
1000 µH
3600 µH
150 µH
10000 µH
DIMENSIONS in inches [millimeters]
C
Typ.
B
D
Dia.
A Dia.
MODEL
A (Dia.)
B
C (Typ.)
D (Dia.)
IM-1 Max. 0.086 [2.18] 0.210 [5.33] 1.62 [41.15] 0.0215 [0.546]
Min. 0.070 [1.78] 0.190 [4.83] 1.38 [35.05] 0.0185 [0.470]
IM-2 Max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546]
Min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470]
IM-4 Max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686]
Min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584]
IM-6 Max. 0.200 [5.08] 0.450 [11.43] 1.63 [41.40] 0.027 [0.686]
Min. 0.180 [4.57] 0.430 [10.92] 1.25 [31.75] 0.023 [0.584]
IM-8 Max. 0.225 [5.72] 0.570 [14.48] 1.63 [41.40] 0.030 [0.762]
Min. 0.205 [5.21] 0.550 [13.97] 1.25 [31.75] 0.026 [0.660]
IM-9 Max. 0.260 [6.60] 0.570 [14.48] 1.63 [41.40] 0.027 [0.686]
Min. 0.240 [6.10] 0.550 [13.97] 1.25 [31.75] 0.023 [0.584]
IM-10 Max. 0.250 [6.35] 0.750 [19.05] 1.63 [41.40] 0.034 [0.864]
Min. 0.230 [5.84] 0.730 [18.54] 1.25 [31.75] 0.030 [0.762]
FEATURES
• Wide inductance range in small package
• Flame retardant coating
• Precision performance, excellent reliability, _RoHS
sturdy construction
COMPLIANT
• Epoxy molded construction provides superior
moisture protection
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 1 %, ± 3 %, ± 5 %, ± 10 %, ± 20 %
Other tolerances available on request.
Insulation Resistance: 1000 Megohm minimum per
MIL-STD-202, Method 302, Test Condition B
Dielectric Strength: Per MIL-STD-202, Method 301:
1000 VAC for IM-2, -4, -6, -8, -9 and -10. 200 VAC for IM-1
MECHANICAL SPECIFICATIONS
Terminal Strength: Per MIL-STD-202, Method 211,
Test Condition A: For IM-1, 3 pounds pull
For IM-2, -4, -6, -8, -9 and -10, 5 pounds pull and twist
Weight: IM-1 = 0.25 gram maximum
IM-2 = 0.30 gram maximum
IM-4 = 0.65 gram maximum
IM-6 = 0.95 gram maximum
IM-8 = 1.5 gram maximum
IM-9 = 2.0 gram maximum
IM-10 = 2.5 gram maximum
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Standard Terminals: IM-1 and IM-2, 24 AWG; IM-4, IM-6
and IM-9, 22 AWG; IM-8, 21 AWG; and IM-10, 20 AWG,
tinned copper
TEST EQUIPMENT*
• H/P 4342A Q-Meter
• Measurements Corporation Megacycle Meter, Model 59
• Wheatstone bridge
* Test procedures per MIL-PRF-15305
ENVIRONMENTAL PERFORMANCE
TEST
CONDITIONS SPECIFICATIONS
Barometric Pressure Test Condition C
Thermal Shock
Test Condition A-1
Flammability
-
Overload
Low Temperature
Storage
Resistance to
Soldering Heat
Resistance to
Solvents
-
-
Test Condition A
-
MIL-STD-202,
Method 105
MIL-STD-202,
Method 107
MIL-STD-202,
Method 111
MIL-PRF-15305
MIL-PRF-15305
MIL-STD-202,
Method 210
MIL-STD-202,
Method 215
www.vishay.com
8
For technical questions contact [e-mail]
Document Number: 34030
Revision: 17-Feb-06