IM-10RFCM-13 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Inductors

IM-10RFCM-13
Vishay Dale
Inductors
Commercial, Molded
FEATURES
• Inductance range is 1 µH to 2200 µH
• Proven reliability molded inductors
STANDARD ELECTRICAL SPECIFICATIONS
MODEL*
RATED*
TEST SRF DCR
DC
IND.
Q FREQ. MIN. MAX. CURRENT
(µH) TOL. MIN. (MHz) (MHz) (Ohms) (mA)
IM-10RFCM-13 1.0 ± 10 % 100 15 136 0.04 2700
IM-10RFCM-13 1.2 ± 10 % 100 15 124 0.04 2700
IM-10RFCM-13 1.5 ± 10 % 100 10 112 0.04 2700
IM-10RFCM-13 1.8 ± 10 % 95 10 100 0.05 2500
IM-10RFCM-13 2.2 ± 10 % 95 10 88 0.05 2500
IM-10RFCM-13 2.7 ± 10 % 68 7.9 76 0.05 2500
IM-10RFCM-13 3.3 ± 10 % 60 7.9 72 0.05 2500
IM-10RFCM-13 3.9 ± 10 % 60 7.9 70 0.07 2100
IM-10RFCM-13 4.7 ± 10 % 60 7.9 60 0.09 1800
IM-10RFCM-13 5.6 ± 10 % 65 7.9 56 0.14 1550
IM-10RFCM-13 6.8 ± 10 % 70 7.9 52 0.17 1300
IM-10RFCM-13 8.2 ± 10 % 65 7.9 46 0.25 1150
IM-10RFCM-13 10 ± 10 % 65 5 40 0.32 1000
IM-10RFCM-13 12 ± 10 % 65 5 36 0.47 870
IM-10RFCM-13 15 ± 10 % 75 4 32 0.62 730
IM-10RFCM-13 18 ± 10 % 65 4 30 0.72 660
IM-10RFCM-13 22 ± 10 % 65 2.5 28 0.80 600
IM-10RFCM-13 27 ± 5 % 65 2.5 25 1.2 520
IM-10RFCM-13 33 ± 5 % 80 2.5 22 1.5 450
IM-10RFCM-13 39 ± 5 % 80 2.5 20 2.3 380
IM-10RFCM-13 47 ± 5 % 100 2.5 19 3.0 300
IM-10RFCM-13 56 ± 5 % 100 2.5 18 4.2 270
IM-10RFCM-13 68 ± 5 % 100 2.5 16 5.2 250
IM-10RFCM-13 82 ± 5 % 100 2.5 14 6.2 220
IM-10RFCM-13 100 ± 5 % 100 1.5 13 7.0 200
IM-10RFCM-13 120 ± 5 % 95 1.5 11 7.5 200
IM-10RFCM-13 150 ± 5 % 90 1
9
8 190
IM-10RFCM-13 180 ± 5 % 85 1
7
9 185
IM-10RFCM-13 220 ± 5 % 85 1 5.5 10 180
IM-10RFCM-13 270 ± 5 % 80 1 4.5 11 172
IM-10RFCM-13 330 ± 5 % 80 0.80 3.5 12 165
IM-10RFCM-13 390 ± 5 % 75 0.80 3.0 13 157
IM-10RFCM-13 470 ± 5 % 75 0.80 2.8 14 150
IM-10RFCM-13 560 ± 5 % 65 0.80 2.5 16 145
IM-10RFCM-13 680 ± 5 % 65 0.80 2.2 17 140
IM-10RFCM-13 820 ± 5 % 65 0.80 2.0 19 132
IM-10RFCM-13 1000 ± 5 % 70 0.50 1.8 21 125
IM-10RFCM-13 1200 ± 5 % 60 0.25 2.2 22 120
IM-10RFCM-13 2200 ± 5 % 70 0.25 1.6 30 100
*Model electricals and tolerances shown.
RoHS
ELECTRICAL SPECIFICATIONS
COMPLIANT
Inductance Tolerance: ± 10 % on Q-Meter for 1 µH to 22 µH.
± 5 % 1000 cps bridge for 27 µH to 2200 µH.
NOTE: L and Q are not always tested at the same frequency.
Inductance values tested on Q-Meter, are tested at standard
test frequencies.
Dielectric Strength: 700 VRMS at sea level
Operating Temperature: - 55 °C to + 125 °C
Self-Resonant Frequency: Minimum SRF measured with full
length leads on Grid-Dip Meter
Q: Measured on Q-Meter
Rating: 1/3 watt dissipation for M Models
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets 5 pound pull test when tested per
MIL-PRF-15305
DENSITY SPECIFICATIONS
Weight: 2 grams maximum
ENVIRONMENTAL SPECIFICATIONS
Moisture: Meets requirements of MIL-PRF-15305.
Shock Resistance: Meets requirements of MIL-PRF-15305.
Vibration: High frequency, 10 Hz to 2000 Hz at 20 G ± 10 %
maximum for 12 logarithmic swings, each of 20 minute
duration repeated for each of three mutually perpendicular
planes.
DIMENSIONS in inches [millimeters]
1.30 [33.02]
Typ. Min.
.250 [6.35]
Dia. Max.
#21 .028 ± .002
[.71± .051] TCW
.600 [15.24]
Max.
MARKING
— Color coded
ORDERING INFORMATION
IM-10RFCM-13
MODEL
1.0 µH
INDUCTANCE VALUE
GLOBAL PART NUMBER
I
M
1
0
R
F
C
MODEL
10 %
INDUCTANCE
TOLERANCE
EZ
PACKAGE CODE
e2
JEDEC LEAD (Pb)-FREE
STANDARD
M
E
Z
1
R
0
K
1
3
PA CKAGE
CODE
INDUCTANCE
VALUE
INDUCTANCE SERIES
TOLERANCE
Document Number: 34037
Revision: 10-Aug-06
For technical questions contact: [e-mail]
www.vishay.com
1