IM-10RFCL-12_06 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Inductors

IM-10RFCL-12
Vishay Dale
Inductors
Commercial, Molded
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
TEST SRF DCR RATED DC
IND.
Q _{FREQ. MIN. MAX. CURRENT}
(µH) TOL. MIN. _{(MHz) (MHz) (Ohms) (mA)}
IM-10RFCL-12 1.0 ± 10 % 130 15 136 0.03 4000
IM-10RFCL-12 1.2 ± 10 % 130 15 124 0.03 4000
IM-10RFCL-12 1.5 ± 10 % 130 10 112 0.03 4000
IM-10RFCL-12 1.8 ± 10 % 130 10 100 0.03 4000
IM-10RFCL-12 2.2 ± 10 % 130 10 92 0.04 3500
IM-10RFCL-12 2.7 ± 10 % 100 10 82 0.04 3500
IM-10RFCL-12 3.3 ± 10 % 100 7.9 72 0.04 3500
IM-10RFCL-12 3.9 ± 10 % 80 7.9 68 0.05 3100
IM-10RFCL-12 4.7 ± 10 % 75 7.9 64 0.05 3100
IM-10RFCL-12 5.6 ± 10 % 65 7.9 58 0.06 3000
IM-10RFCL-12 6.8 ± 10 % 65 7.9 52 0.06 3000
IM-10RFCL-12 8.2 ± 10 % 65 7.9 46 0.11 2400
IM-10RFCL-12 10 ± 10 % 75 5.0 40 0.15 1800
IM-10RFCL-12 12 ± 10 % 75 5.0 36 0.23 1600
IM-10RFCL-12 15 ± 10 % 75 5.0 32 0.3 1300
IM-10RFCL-12 18 ± 10 % 75 5.0 29 0.4 1150
IM-10RFCL-12 22 ± 10 % 75 2.5 26 0.5 1000
IM-10RFCL-12 27 ± 5 % 70 2.5 24 0.6 900
IM-10RFCL-12 33 ± 5 % 70 2.5 22 0.7 850
IM-10RFCL-12 39 ± 5 % 70 2.5 21 1.1 720
IM-10RFCL-12 47 ± 5 % 75 2.5 20 1.3 620
IM-10RFCL-12 56 ± 5 % 80 2.5 18 1.8 540
IM-10RFCL-12 68 ± 5 % 100 2.5 16 2.4 450
IM-10RFCL-12 82 ± 5 % 100 2.5 14 2.8 425
IM-10RFCL-12 100 ± 5 % 100 1.5 13 3.2 400
IM-10RFCL-12 120 ± 5 % 100 1.5 12 4.8 360
IM-10RFCL-12 150 ± 5 % 100 1.0 11 6.4 280
IM-10RFCL-12 180 ± 5 % 95 1.0 10 9.5 240
IM-10RFCL-12 220 ± 5 % 95 1.0 9 12 200
IM-10RFCL-12 270 ± 5 % 70 1.0 7 13 195
IM-10RFCL-12 330 ± 5 % 65 0.79 6 14 190
IM-10RFCL-12 390 ± 5 % 65 0.79 5 15.5 180
IM-10RFCL-12 470 ± 5 % 60 0.79 4 17 170
IM-10RFCL-12 560 ± 5 % 75 0.50 3 18.5 165
IM-10RFCL-12 680 ± 5 % 75 0.50 2.50 20 155
IM-10RFCL-12 820 ± 5 % 75 0.50 2.00 22 150
IM-10RFCL-12 1000 ± 5 % 75 0.50 1.90 24 145
IM-10RFCL-12 1200 ± 5 % 75 0.50 1.70 27 137
IM-10RFCL-12 1500 ± 5 % 75 0.40 1.50 29 130
IM-10RFCL-12 1800 ± 5 % 65 0.40 1.40 32 125
IM-10RFCL-12 2200 ± 5 % 65 0.25 1.20 35 120
IM-10RFCL-12 2700 ± 5 % 65 0.25 1.00 40 112
IM-10RFCL-12 3300 ± 5 % 65 0.25 0.95 45 105
IM-10RFCL-12 3900 ± 5 % 65 0.25 0.80 49 100
IM-10RFCL-12 4700 ± 5 % 65 0.25 0.75 53
95
IM-10RFCL-12 5600 ± 5 % 65 0.25 0.70 60
90
IM-10RFCL-12 6800 ± 5 % 65 0.25 0.60 67
85
IM-10RFCL-12 8200 ± 5 % 65 0.25 0.50 75
82
IM-10RFCL-12 10 000 ± 5 % 65 0.15 0.45 80
80
* Model electricals and tolerances shown
FEATURES
• Inductance range is 1 µH to 10 000 µH
• Proven reliability molded inductors
ELECTRICAL SPECIFICATIONS
RoHS
COMPLIANT
Inductance Tolerance: ± 10 % on Q-Meter for 1 µH to 22 µH
± 5 % 1000 cps bridge for 27 µH to 10 000 µH
NOTE: L and Q are not always tested at the same frequency.
Inductance values tested on Q-Meter, are tested at standard
test frequencies.
Dielectric Strength: 700 VRMS at sea level
Operating Temperature: - 55 °C to + 125 °C
Self-Resonant Frequency: Minimum SRF measured with
full length leads on Grid-Dip Meter
Q: Measured on Q-Meter
Rating: 1/2 watt dissipation for L Models
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets 5 pound pull test when tested
per MIL-PRF-15305 (latest revision)
DENSITY SPECIFICATIONS
Weight: 4.1 grams maximum
ENVIRONMENTAL SPECIFICATIONS
Moisture Resistance: Meets requirements of MIL-PRF-15305
Shock Resistance: Meets requirements of MIL-PRF-15305
Vibration: High frequency, 10 Hz to 2000 Hz at 20 G ± 10 %
maximum for 12 logarithmic swings, each of 20 minute
duration repeated for each of three mutually perpendicular
planes
DIMENSIONS in inches [millimeters]
1.30 [33.02]
Typ. Min.
0.310 [7.87]
Dia. Max.
# 21 0.0285 ± 0.002
[0.724 ± 0.051]
TCW
0.900 [22.86]
Max.
MARKING
- Color coded
www.vishay.com
18
For technical questions contact [e-mail]
Document Number: 34036
Revision: 10-Aug-06