IM-10RFCL-12 Datasheet, PDF (1/1 Pages) Vishay Siliconix – Precision, 100UA Gain Selectable Amplifier

IM-10RFCL-12
Vishay Dale
Inductors
Commercial, Molded
FEATURES
• Inductance range is 1µH to 10,000µH.
• Proven reliability molded inductors.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL*
TEST SRF DCR RATED DC
IND.
Q FREQ. MIN. MAX. CURRENT
(µH) TOL. MIN. (MHz) (MHz) (Ohms) (mA)
IM-10RFCL-12 1.0 ± 10% 130 15 136 0.03
IM-10RFCL-12 1.2 ± 10% 130 15 124 0.03
IM-10RFCL-12 1.5 ± 10% 130 10 112 0.03
IM-10RFCL-12 1.8 ± 10% 130 10 100 0.03
IM-10RFCL-12 2.2 ± 10% 130 10 92 0.04
IM-10RFCL-12 2.7 ± 10% 100 10 82 0.04
IM-10RFCL-12 3.3 ± 10% 100 7.9 72 0.04
IM-10RFCL-12 3.9 ± 10% 80 7.9 68 0.05
IM-10RFCL-12 4.7 ± 10% 75 7.9 64 0.05
IM-10RFCL-12 5.6 ± 10% 65 7.9 58 0.06
IM-10RFCL-12 6.8 ± 10% 65 7.9 52 0.06
IM-10RFCL-12 8.2 ± 10% 65 7.9 46 0.11
IM-10RFCL-12 10 ± 10% 75 5 40 0.15
IM-10RFCL-12 12 ± 10% 75 5 36 0.23
IM-10RFCL-12 15 ± 10% 75 5 32 0.3
IM-10RFCL-12 18 ± 10% 75 5 29 0.4
IM-10RFCL-12 22 ± 10% 75 2.5 26 0.5
IM-10RFCL-12 27 ± 5% 70 2.5 24 0.6
IM-10RFCL-12 33 ± 5% 70 2.5 22 0.7
IM-10RFCL-12 39 ± 5% 70 2.5 21 1.1
IM-10RFCL-12 47 ± 5% 75 2.5 20 1.3
IM-10RFCL-12 56 ± 5% 80 2.5 18 1.8
IM-10RFCL-12 68 ± 5% 100 2.5 16 2.4
IM-10RFCL-12 82 ± 5% 100 2.5 14 2.8
IM-10RFCL-12 100 ± 5% 100 1.5 13 3.2
IM-10RFCL-12 120 ± 5% 100 1.5 12 4.8
IM-10RFCL-12 150 ± 5% 100 1 11 6.4
IM-10RFCL-12 180 ± 5% 95 1 10 9.5
IM-10RFCL-12 220 ± 5% 95 1
9
12
IM-10RFCL-12 270 ± 5% 70 1
7
13
IM-10RFCL-12 330 ± 5% 65 0.79 6
14
IM-10RFCL-12 390 ± 5% 65 0.79 5 15.5
IM-10RFCL-12 470 ± 5% 60 0.79 4
17
IM-10RFCL-12 560 ± 5% 75 0.50 3 18.5
IM-10RFCL-12 680 ± 5% 75 0.50 2.5 20
IM-10RFCL-12 820 ± 5% 75 0.50 2.0 22
IM-10RFCL-12 1000 ± 5% 75 0.50 1.9 24
IM-10RFCL-12 1200 ± 5% 75 0.50 1.7 27
IM-10RFCL-12 1500 ± 5% 75 0.40 1.5 29
IM-10RFCL-12 1800 ± 5% 65 0.40 1.4 32
IM-10RFCL-12 2200 ± 5% 65 0.25 1.2 35
IM-10RFCL-12 2700 ± 5% 65 0.25 1.0 40
IM-10RFCL-12 3300 ± 5% 65 0.25 0.95 45
IM-10RFCL-12 3900 ± 5% 65 0.25 0.80 49
IM-10RFCL-12 4700 ± 5% 65 0.25 0.75 53
IM-10RFCL-12 5600 ± 5% 65 0.25 0.70 60
IM-10RFCL-12 6800 ± 5% 65 0.25 0.60 67
IM-10RFCL-12 8200 ± 5% 65 0.25 0.50 75
IM-10RFCL-12 10000 ± 5% 65 0.15 0.45 80
4000
4000
4000
4000
3500
3500
3500
3100
3100
3000
3000
2400
1800
1600
1300
1150
1000
900
850
720
620
540
450
425
400
360
280
240
200
195
190
180
170
165
155
150
145
137
130
125
120
112
105
100
95
90
85
82
80
*Model electricals and tolerances shown.
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 10% on Q-Meter for 1µH to 22µH.
± 5% 1000 cps bridge for 27µH to 10,000µH.
NOTE: L and Q are not always tested at the same frequency.
Inductance values tested on Q-Meter are tested at standard
test frequencies.
Dielectric Strength: 700VRMS at sea level.
Operating Temperature: - 55°C to + 125°C.
Self-Resonant Frequency: Minimum SRF measured with full
length leads on Grid-Dip Meter.
Q: Measured on Q-Meter.
Rating: 1/2 watt dissipation for L Models.
MECHANICAL SPECIFICATIONS
Terminal Strength: Meets 5 pound pull test when tested per
MIL-C-15305 (latest revision).
DENSITY SPECIFICATIONS
Weight: 4.1 grams maximum.
ENVIRONMENTAL SPECIFICATIONS
Moisture Resistance: Meets requirements of MIL-C-15305.
Shock Resistance: Meets requirements of MIL-C-15305.
Vibration: High frequency, 10 Hz to 2000 Hz @ 20 G ± 10%
maximum for 12 logarithmic swings, each of 20 minute duration
repeated for each of three mutually perpendicular planes.
DIMENSIONS in inches [millimeters]
1.30 [33.02]
Typ. Min.
.310 [7.87]
Dia. Max.
#21 .0285 ± .002
[.724 ± .051] TCW
.900 [22.86]
Max.
MARKING
— Color coded
ORDERING INFORMATION
IM-10RFCL-12
MODEL
1.0µH
INDUCTANCE
VALUE
± 10%
INDUCTANCE
TOLERANCE
www.vishay.com
18
For technical questions, contact [e-mail]
Document Number 34036
Revision 02-Nov-01