IL205AT_05 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, With Base Connection in SOIC-8 package

IL205AT/ 206AT/ 207AT/ 208AT
Vishay Semiconductors
Optocoupler, Phototransistor Output, With Base Connection in
SOIC-8 package
Features
• High BV_CEO, 70 V
• Isolation Test Voltage, 3000 V_RMS
• Industry Standard SOIC-8A Surface
e3
Mountable Package
• Compatible with Dual Wave, Vapor
Phase and IR Reflow Soldering
• Lead (Pb)-free component
i179002
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
A1
K2
NC 3
NC 4
8 NC
7B
6C
5E
Agency Approvals
• UL1577, File No. E52744 System Code Y
• DIN EN 60747-5-2 (VDE0884)
DIN EN 60747-5-5 pending
Available with Option 1
A specified minimum and maximum CTR allows a
narrow tolerance in the electrical design of the adja-
cent circuits. The high BV_CEO of 70 V gives a higher
safety margin compared to the industry standard
30 V.
Description
The IL205AT/ IL206AT/ IL207AT/ IL208AT are opti-
cally coupled pairs with a Gallium Arsenide infrared
LED and a silicon NPN phototransistor. Signal infor-
mation, including a DC level, can be transmitted by
the device while maintaining a high degree of electri-
cal isolation between input and output. This family
comes in a standard SOIC-8A small outline package
for surface mounting which makes them ideally suited
for high density application with limited space. In addi-
tion to eliminating through-hole requirements, this
package conforms to standards for surface mounted
devices.
Order Information
Part
IL205AT
IL206AT
IL207AT
IL208AT
Remarks
CTR 40 - 80 %, SOIC-8
CTR 63 - 125 %, SOIC-8
CTR 100 - 200 %, SOIC-8
CTR 160 - 320 %, SOIC-8
Available on Tape and Reel only.
For additional information on the available options refer to
Option Information.
Absolute Maximum Ratings
T_amb = 25 °C, unless otherwise specified
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is
not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
Maximum Rating for extended periods of the time can adversely affect reliability.
Input
Parameter
Peak reverse voltage
Forward continuous current
Power dissipation
Derate linearly from 25 °C
Test condition
Symbol
V_R
I_F
P_diss
Value
6.0
60
90
1.2
Unit
V
mA
mW
mW/°C
Document Number 83614
Rev. 1.6, 18-Apr-05
www.vishay.com
1