IHLP6767GZER2R2M5A Datasheet, PDF (1/6 Pages) Vishay Siliconix – Low Profile, High Current IHLP Inductors

www.vishay.com
IHLP-6767GZ-5A
Vishay Dale
Low Profile, High Current IHLP^® Inductors
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
STANDARD ELECTRICAL SPECIFICATIONS
L₀
INDUCTANCE
± 20 % AT 100 kHz,
0.25 V, 0 A
(μH)
DCR
TYP.
25 °C
(mΩ)
DCR
MAX.
25 °C
(mΩ)
HEAT
RATING
CURRENT
DC TYP.
(A) ⁽³⁾
SATURATION
CURRENT
DC TYP.
(A) ⁽⁴⁾
0.47
0.89 0.95
63.0
87.0
1.0
1.36 1.46
53.0
42.0
2.2
2.25 2.41
38.5
38.0
3.3
3.06 3.27
32.2
32.0
4.7
4.89 5.23
24.0
26.0
8.2
8.6 9.23
17.5
14.5
10.0
10.20 10.91 16.0
20.0
15.0
15.85 16.96 12.5
13.0
22.0
21.28 22.27 11.7
11.0
Notes
(1) _{All test data is referenced to 25 °C ambient}
(2) _{Operating temperature range - 55 °C to + 155 °C}
(3) _{DC current (A) that will cause an approximate ΔT of 40 °C}
(4) _{DC current (A) that will cause L0 to drop approximately 20 %}
(5) _{The part temperature (ambient + temp. rise) should not exceed}
155 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
(6) _{Maximum recommended operating voltage (across inductor)}
= 200 V
FEATURES
• High temperature, up to 155 °C
• Shielded construction
• Frequency range up to 1 MHz
• Lowest DCR/μH, in this package size
• Handles high transient current spikes without
saturation
• Ultra low buzz noise, due to composite
construction
• AEC-Q200 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Engine and transmission control units
• Diesel injection drivers
• DC/DC converters for entertainment/navigation systems
• Noise suppression for motors
- Windshield wipers
- Power seats
- Power mirrors
- Heating and ventilation blowers
- HID lighting
• LED drivers
DIMENSIONS in inches [millimeters]
0.675
[17.15]
Max.
0.675 ± 0.005
[17.15 ± 0.127]
0.276
[7.00]
Max.
0.083 ± 0.01
[2.11 ± 0.3]
0.47 ± 0.01
[11.94 ± 0.3]
Typical Pad Layout
0.725
[18.42]
0.480
[12.19]
0.479
[12.17]
DESCRIPTION
IHLP-6767GZ-5A
2.2 μH
MODEL
INDUCTANCE VALUE
± 20 %
INDUCTANCE TOLERANCE
ER
PACKAGE CODE
e3
JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
H
L
P
6
7
6
7
G
Z
E
R
2
R
2
M
5
A
PRODUCT FAMILY
SIZE
PACKAGE
CODE
INDUCTANCE
VALUE
TOL. SERIES
Revision: 25-Jun-13
1
Document Number: 34319
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000