IHLP-5050CE-06 Datasheet, PDF (1/4 Pages) Vishay Siliconix – 10 % DCR Tolerance, Low Profile, Power Inductor

IHLP-5050CE-06
Vishay Dale
10 % DCR Tolerance,
Low Profile, Power Inductor
Manufactured under one or more of the following:
US Patents; 6,198,375/6,204,744/6,449,829/6,460,244.
Several foreign patents, and other patents pending.
FEATURES
• Lowest height (3.5 mm) in this package footprint
• Shielded construction
• Frequency range up to 5.0 MHz
• Lowest DCR/µH, in this package size
RoHS
• Handles high transient current spikes without saturation _{COM PLIANT}
• Ultra low buzz noise, due to composite construction
• 100 % lead (Pb)-free and RoHS compliant
APPLICATIONS
• Tolerance DCR for current sense applications
• Improved current balance in phased power supplies
• Improved thermal management
• PDA/Notebook/Desktop/Server and Battery powered devices
• High current, Low profile POL converters
• DC/DC converters in distributed power systems
• DC/DC converter for Field Programmable Gate Arrays (FPGA)
STANDARD ELECTRICAL SPECIFICATIONS
Lo
INDUCTANCE DCR mΩ
µH ± 20 % at
± 10 %
100 kHz, 0.25 V, 0 A at 25 °C
HEAT RATING
CURRENT
DC AMPS³
TYPICAL
SATURATION
CURRENT
DC AMPS⁴
TYPICAL
0.60
1.85
29
51
0.68
2.34
28
49
1.0
3.21
24
40
1.5
4.97
19
35
2.2
7.20
16
29
3.3
10.69
12
27
4.7
14.27
10
24
5.6
18.19
9.5
19
10
30.86
7
14
NOTES:
1. All test data is referenced to 25 °C ambient
2. Operating Temperature Range - 55 °C to + 125 °C
3. DC current (A) that will cause an approximate ΔT of 40 °C
4. DC current (A) that will cause Lo to drop approximately 20 %
5. The part temperature (ambient + temp rise) should not exceed
125 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application.
DIMENSIONS in inches [millimeters]
0.508
[12.9]
Max.
0.138
[3.5] Max.
0.091 ± 0.01
[2.3 ± 0.3]
Typical Pad Layout
0.195
[4.95]
0.542
[13.76]
0.310
[7.87]
0.185 ± 0.01
[4.7 ± 0.3]
0.520 ± 0.015
[13.2 ± 0.38] Max.
The diagram above applies to values 0.6 µH and below.
0.508
[12.9]
Max.
0.138
[3.5] Max.
0.087 ± 0.01
[2.2 ± 0.254]
Typical Pad Layout
0.542
[13.8]
0.128 [3.3]
0.318
[8.1]
0.118 ± 0.01
[3.0 ± 0.3]
0.520 ± 0.015
[13.2 ± 0.38]
The diagram above applies to values 0.68 µH and above.
DESCRIPTION
IHLP-5050CE-06
MODEL
1.0 µH
INDUCTANCE
VALUE
GLOBAL PART NUMBER
± 20 %
INDUCTANCE
TOLERANCE
ER
PACKAGE
CODE
e3
JEDEC LEAD (Pb)-FREE
STANDARD
I
H
L
P
5
0
5
0
C
E
E
R
1
R
0
M
0
6
MODEL
SIZE
PACKAGE
CODE
INDUCTANCE INDUCTANCE SERIES
VALUE
TOLERANCE
www.vishay.com
54
For technical questions, contact: [e-mail]
Document Number: 34165
Revision: 21-Mar-06