HV500V_1 Datasheet, PDF (1/5 Pages) Vishay Siliconix – Ceramic Disc Capacitors Class 1, 500 V (DC) Narrow Tolerance

HV 500 V Narrow Tolerance
Vishay BCcomponents
Ceramic Disc Capacitors
Class 1, 500 V (DC) Narrow Tolerance
D
tangent
line
SH
FEATURES
• Low losses
• High stability
• High capacitance in small size
• Kinked (preferred) or straight leads
• Lead (Pb)-free available
APPLICATIONS
• Bypassing
• Coupling
• Resonant circuit
e3
RoHS
COMPLIANT
F
Capacitors with 5 mm (0.20") lead spacing
DESIGN
The capacitors consist of a ceramic disc both sides of which
are silver-plated. Connection leads are made of tinned
copper having a diameter of 0.6 mm.
The capacitors have inward kinked leads with a spacing of
5 mm (0.200") and a lead length from 4 to 30 mm.
Encapsulation is made of phenolic resin.
TEMPERATURE COEFFICIENTS:
Class 1 NP0; N750
CAPACITANCE RANGE:
Class 1, at 1 MHz, 1.2 V (RMS); 1.0 pF to 330 pF
1 kHz, 1 ± 0.2 V (RMS) for capacitance values higher than
1000 pF
SECTIONAL SPECIFICATIONS:
Class 1 IEC 60 384-8,
EIA 198
CLIMATIC CATEGORY:
Class 1 55/125/21
OPERATING TEMPERATURE RANGE:
Class 1 - 55 to + 125 °C
MARKING
Marking indicates capacitance value and tolerance in
accordance with “EIA 198”.
RATED DC VOLTAGE:
500 V
DIELECTRIC STRENGTH:
250 % of rated voltage
INSULATION RESISTANCE AT 500 V (DC):
≥ 10 000 MΩ
TOLERANCE ON CAPACITANCE:
± 0.25 pF; ± 2 %
DISSIPATION FACTOR:
Class 1, C ≤ 30 pF; ≤ 20 x (10/C + 0.7) x 10^-4 maximum
Class 1, C > 30 pF; ≤ 0.2 %
The capacitors meet the essential requirements of “EIA 198”. Unless stated otherwise all electrical values apply at an ambient
temperature of 25 ± 3 °C, at normal atmospheric conditions.
www.vishay.com
40
For technical questions, contact: [e-mail]
Document Number: 28514
Revision: 20-Mar-07