H11A1 Datasheet, PDF (1/8 Pages) Motorola, Inc – 6-Pin DIP Optoisolators Transistor Output

End of Life January-2018 - Alternative Device: CNY17
www.vishay.com
H11A1, H11A2, H11A3, H11A4, H11A5
Vishay Semiconductors
Optocoupler, Phototransistor Output, with Base Connection
A1
C2
NC 3
6B
5C
4E
i179004-3
DESCRIPTION
The H11Ax family is an industry standard single channel
phototransistor coupler. It includes the H11A1, H11A2,
H11A3, H11A4, H11A5 couplers.
Each optocoupler consists of gallium arsenide infrared LED
and a silicon NPN phototransistor.
The isolation performance is accomplished through Vishay
double molding isolation manufacturing process.
Compliance to DIN EN 60747-5-5 partial discharge isolation
specification is available is by ordering option 1.
These isolation processes and the Vishay ISO9001 quality
program results in the highest isolation performance
available for a commercial plastic phototransistor
optocoupler.
The devices are available in lead formed configuration
suitable for surface mounting and are available either on
tape and reel, or in standard tube shipping containers.
Note
• Designing with data sheet is covered in Application Note 45.
FEATURES
• Interfaces with common logic families
• Input-output coupling capacitance < 0.5 pF
• Industry standard dual-in line 6-pin package
• Isolation rated voltage 4420 V_RMS
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• AC mains detection
• Reed relay driving
• Switch mode power supply feedback
• Telephone ring detection
• Logic ground isolation
• Logic coupling with high frequency noise rejection
AGENCY APPROVALS
• UL1577, file no. E52744, double protection
• cUL tested to CSA 22.2 bulletin 5A
• CSA 93751
• BSI EN 60950, BSI EN 60065
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• FIMKO
• CQC: GB 8898-2011, GB 4943.1-2011
ORDERING INFORMATION
H
1
1
A
#
-
X
0
0
#
X
PART NUMBER
PACKAGE OPTION
TAPE
AND
REEL
DIP
7.62 mm
Option 7
Option 6
10.16 mm
Option 9
AGENCY CERTIFIED/PACKAGE
UL, CSA, BSI, FIMKO, CQC
> 50
DIP-6
H11A1,
H11A1-X001
H11A2
DIP-6, 400 mil, option 6
H11A1-X006
-
SMD-6, option 7
H11A1-X007,
H11A1-X017
-
SMD-6, option 9
H11A1-X009,
H11A1-X009T
-
Note
• Additional options may be possible, please contact sales office.
> 20
CTR (%)
H11A3
-
-
-
> 0.7 mm
> 10
H11A4
-
-
-
> 0.1 mm
> 30
H11A5
-
-
-
Rev. 1.7, 23-Jul-15
1
Document Number: 83730
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000