GSIB6A20 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Glass Passivated Single-Phase Bridge Rectifier

GSIB6A20 thru GSIB6A80
New Product
Vishay Semiconductors
formerly General Semiconductor
Glass Passivated Single-Phase
Bridge Rectifier
Rectifier Reverse Voltage 200 and 800V
Rectifier Forward Current 6.0A
Case Style 5S
30 ^±0.3
+
2.5 ^±0.2
2.2 ^±0.2
1^± 0.1
7.5 7.5
10 ^±0.2 ^±0.2 ^±0.2
0.7 ^±0.1
Dimensions in millimeters
4.6 ^±0.2
3.6 ^±0.2
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• High case dielectric strength of 1500 VRMS
• Ideal for printed circuit boards
• Glass passivated chip junction
• High surge current capability
2.7 ^±0.2
Mechanical Data
Case: 5S Molded plastic body
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3kg) tension
Mounting Position: Any ⁽³⁾
Mounting Torque: 5 in. - lb. max.
Weight: 0.26 oz., 7.0 g
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB6A20 GSIB6A40 GSIB6A60 GSIB6A80 Unit
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
V
Maximum RMS voltage
VRMS
140
280
420
560
V
Maximum DC blocking voltage
Maximum average forward rectified
output current at
VDC
200
TC = 100°C
TA = 25°C
IF(AV)
400
600
6.0⁽¹⁾
2.8⁽²⁾
800
V
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
150
A
Rating for fusing (t < 8.3ms)
I²t
93
A²sec
Maximum thermal resistance per leg
RθJA
RθJC
22⁽²⁾
3.4 ⁽¹⁾
°C/W
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB6A20 GSIB6A40 GSIB6A60 GSIB6A80
Maximum instantaneous forward voltage drop
per leg at 3.0A
VF
1.00
Maximum DC reverse current at
rated DC blocking voltage per leg
TA = 25°C
TA = 125°C
IR
10
250
Notes:
(1) Unit case mounted on Al plate heatsink
(2) Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads and 0.375" (9.5mm) lead length
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for
maximum heat transfer with #6 screw
Unit
V
µA
Document Number 88649
25-Mar-02
www.vishay.com
1