GSIB620 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Glass Passivated Single-Phase Bridge Rectifier

GSIB620 thru GSIB680
New Product
Vishay Semiconductors
formerly General Semiconductor
Glass Passivated Single-Phase
Bridge Rectifier
Rectifier Reverse Voltage 200 and 800 V
Rectifier Forward Current 6.0 A
Case Style GSIB-5S
30 ^±0.3
+
2.5 ^±0.2
4.6 ^±0.2
3.6 ^±0.2
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL listed under the Recognized
Component Index, file number E54214
• High case dielectric strength of 1500 VRMS
• Ideal for printed circuit boards
• Glass passivated chip junction
• High surge current capability
Mechanical Data
2.2 ^±0.2
1^± 0.1
7.5 7.5
10 ^±0.2 ^±0.2 ^±0.2
0.7 ^±0.1
2.7 ^±0.2
Dimensions in millimeters
Case: 5S Molded plastic body
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3kg) tension
Mounting Position: Any⁽³⁾
Mounting Torque: 5 in-lbs max.
Weight: 0.26 oz., 7.0 g
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB620 GSIB640 GSIB660 GSIB680 Unit
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
V
Maximum RMS voltage
VRMS
140
280
420
560
V
Maximum DC blocking voltage
Maximum average forward rectified
output current at
TC = 100°C
TA = 25°C
VDC
200
400
600
800
V
IF(AV)
6.0⁽¹⁾
2.8⁽²⁾
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
180
A
Rating for fusing (t < 8.3ms)
I²t
120
A²sec
Typical thermal resistance per leg
RθJA
RθJC
22⁽²⁾
3.4⁽¹⁾
°C/W
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB620 GSIB640 GSIB660 GSIB680 Unit
Maximum instantaneous forward voltage drop
per leg at 3.0A
VF
0.95
V
Maximum DC reverse current at
rated DC blocking voltage per leg
TA = 25°C
TA = 125°C
IR
10
250
µA
Notes: (1) Unit case mounted on Al plate heatsink
(2) Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads and 0.375" (9.5mm) lead length
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for
maximum heat transfer with #6 screw
Document Number 88648
1-Dec-03
www.vishay.com
1