GSIB420 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Single-Phase Single In-Line Bridge Rectifier

GSIB420 thru GSIB480
New Product
Vishay Semiconductors
formerly General Semiconductor
Single-Phase Single In-Line
Bridge Rectifier
Reverse Voltage
200 and 800V
Forward Current 4.0A
Case Style GSIB-3G
0.118 x 45 Chamfer
0.996 (25.3)
0.972 (24.7)
0.492
(12.5)
0.134 (3.4)
0.122 (3.1)
Dia.
0.150 (3.8)
0.134 (3.4)
Detail Z
enlarged
0.602 (15.3)
0.579 (14.7)
0.157 (4.0) ₊
0.059 ^{0.382 (9.7)}
(1.50) 0.366 (9.3)
Z
0.057(1.45)
0.041(1.05)
0.709 (18.0)
0.669 (17.0)
0.146 (3.7)
0.130 (3.3)
0.709 (18.0)
0.669 (17.0)
0.078 (1.98)
0.062 (1.58)
0.303 (7.7) _(3x)
0.287 (7.3)
0.042 (1.07)
0.038 (0.96)
Dia.
Dimensions in inches and (millimeters)
Use suffix "N" for no stand-off
0.012
(0.30)
0.189 (4.8)
0.173 (4.4)
0.126 (3.2)
0.110 (2.8)
Features
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• High case dielectric strength of 1500 VRMS
• Ideal for printed circuit boards
• Glass passivated chip junction
• High surge current capability
Mechanical Data
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
High temperature soldering guaranteed:
260°C/10 seconds, 0.375" (9.5mm) lead length,
5lbs. (2.3kg) tension
Mounting Position: Any ⁽³⁾
Mounting Torque: 5 in-lbs max.
Weight: 0.15 oz., 4.0 g
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB420 GSIB440 GSIB460 GSIB480 Unit
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
V
Maximum RMS voltage
VRMS
140
280
420
560
V
Maximum DC blocking voltage
VDC
200
400
600
800
V
Maximum average forward rectified
output current at
TC = 100°C
TA = 25°C
IF(AV)
4.0 ⁽¹⁾
2.3 ⁽²⁾
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
130
A
Rating for fusing (t<8.3ms)
Maximum thermal resistance per leg
I²t
RΘJA
RΘJC
60
26 ⁽²⁾
5 ⁽¹⁾
A²sec
°C/W
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB420 GSIB440 GSIB460 GSIB480
Maximum instantaneous forward voltage drop
per leg at 2.0A
VF
0.95
Maximum DC reverse current at
rated DC blocking voltage per leg
TA = 25°C
TA = 125°C
IR
10
250
Notes: (1) Unit case mounted on Al plate heatsink.
(2) Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads and 0.375" (9.5mm) lead length
(3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for
maximum heat transfer with #6 screw
Unit
V
µA
Document Number 88647
26-Nov-03
www.vishay.com
1