GSIB2020 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Single-Phase Single In-Line Bridge Rectifiers

New Product
GSIB2020 thru GSIB2080
Vishay Semiconductors
formerly General Semiconductor
Single-Phase Single In-Line
Bridge Rectifiers
Features
Reverse Voltage 200 to 800V
Forward Current 20A
Case Style GSIB-5S
30 ^±0.3
+
2.5 ^±0.2
2.2 ^±0.2
4.6 ^±0.2
3.6 ^±0.2
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• This series is UL listed under the Recognized
Component Index, file number E54214.
• High case dielectric strength of 2500 VRMS
• Ideal for printed circuit boards
• Glass passivated chip junction
• High surge current capability
• High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3kg) tension
Mechanical Data
1^± 0.1
7.5 7.5
10 ^±0.2 ^±0.2 ^±0.2
Dimensions in millimeters
0.7 ^±0.1
2.7 ^±0.2
Case: GSIB-5S Molded plastic body
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any (Note 3)
Mounting Torque: 8 in-lbs max.
Weight: 0.26 oz., 7.0 g
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB2020 GSIB2040 GSIB2060 GSIB2080 Unit
Maximum repetitive peak reverse voltage
VRRM
200
400
600
800
V
Maximum RMS voltage
VRMS
140
280
420
560
V
Maximum DC blocking voltage
Maximum average forward rectified
output current at
VDC
200
TC = 87°C⁽¹⁾
TA = 25°C⁽²⁾
IF(AV)
400
600
20
3.5
800
V
A
Peak forward surge current single sine-wave
superimposed on rated load (JEDEC Method)
IFSM
240
A
Rating for fusing (t < 8.3ms)
I²t
240
A²sec
Maximum thermal resistance per leg
RθJA
RθJC
22⁽²⁾
1.5⁽¹⁾
°C/W
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol GSIB2020 GSIB2040 GSIB2060 GSIB2080 Unit
Maximum instantaneous forward voltage drop
per leg at 10A
VF
1.00
V
Maximum DC reverse current at
rated DC blocking voltage per leg
TA = 25°C
TA = 125°C
IR
10
250
µA
Notes: (1) Unit case mounted on Al plate heatsink.
(2) Units mounted on P.C.B. without heatsink
(3) Recommended mounting position is to bolt down on heatsink with silicone
thermal compound for maximum heat transfer with #6 screw
Document Number 88645
1-Dec-03
www.vishay.com
1