GP10A Datasheet, PDF (1/2 Pages) Zowie Technology Corporation – SINTERED GLASS PASSIVATED JUNCTION RECTIFIER

GP10A thru GP10Y
Vishay Semiconductors
formerly General Semiconductor
DO-204AL (DO-41)
0.107 (2.7)
0.080 (2.0)
DIA.
®
Glass Passivated Junction Rectifiers
1.0 (25.4)
MIN.
Patented*
Features
Reverse Voltage
50 to 1600V
Forward Current 1.0A
0.205 (5.2)
0.160 (4.1)
Dimensions in
inches and
(millimeters)
1.0 (25.4)
MIN.
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
• High temperature metallurgically bonded construction
• Cavity-free glass passivated junction
• Capable of meeting environmental standards of
MIL-S-19500
• 1.0 Ampere operation at TA = 75°C and 55°C with no
thermal runaway
• Typical IR less than 0.1µA
• High temperature soldering guaranteed: 350°C/10 seconds,
0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
0.034 (0.86)
0.028 (0.71)
DIA.
NOTE: Lead diameter is ^{0.026 (0.66)} for suffix "E" part numbers
0.023 (0.58)
*Glass-plastic encapsulation technique is covered by
Patent No. 3,996,602, and brazed-lead assembly by Patent No. 3,930,306
Mechanical Data
Case: JEDEC DO-204AL, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 oz., 0.3 g
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol A B D G J K M N Q T V W Y Unit
Maximum repetitive peak reverse voltage
VRRM
50 to 1600V (See Fig. 5)
V
Maximum average forward rectified current
0.375" (9.5mm) lead length (See fig. 1)
IF(AV)
1.0
A
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
30
25
A
Maximum full load reverse current, full cycle
average, 0.375" (9.5mm) lead lengths at TA = 75°C
IR(AV)
30
µA
Typical thermal resistance (Note 1)
RθJA
55
°C/W
Operating junction and storage temperature range
TJ, TSTG
–65 to +175
–65 to +150
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol A B D G J K M N Q T V W Y Unit
Maximum instantaneous forward voltage at 1.0A
VF
1.1
1.2
1.3
V
Maximum DC reverse current
at rated DC blocking voltage
TA = 25°C
TA = 125°C
IR
5.0
50
µA
Typical reverse recovery time at
IF = 0.5A, IR = 1.0A, Irr = 0.25A
trr
3.0
µs
Typical junction capacitance at 4.0V, 1MHz
CJ
8.0
7.0
5.0
pF
Note: (1) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted
Document Number 88637
5-Mar-02
www.vishay.com
1