GBPC610-E4-51 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Glass Passivated Single-Phase Bridge Rectifier

GBPC6005, GBPC601, GBPC602, GBPC604, GBPC606, GBPC608, GBPC610
www.vishay.com
Vishay General Semiconductor
Glass Passivated Single-Phase Bridge Rectifier
~
~
~
~
Case Style GBPC6
FEATURES
• UL recognition file number E54214
• Ideal for printed circuit boards
• Typical I_R less than 0.5 μA
e4
• High surge current capability
• High case dielectric strength 1500 V_RMS
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
Package
GBPC6
I_F(AV)
6A
V_RRM
50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
I_FSM
175 A
I_R
5 μA
V_F at I_F = 3.0 A
1.0 V
T_J max.
Diode variations
150 °C
Quad
TYPICAL APPLICATIONS
General purpose use in AC/DC bridge full wave rectification
for power supply, home appliances, office equipment,
industrial automation applications.
MECHANICAL DATA
Case: GBPC6
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E4 - RoHS-compliant, commercial grade
Terminals: Silver plated leads, solderable per
J-STD-002 and JESD22-B102
Polarity: As marked, positive lead by beveled corner
Mounting Torque: 10 cm-kg (8.8 in-lbs) maximum
Recommended Torque: 5.7 cm-kg (5 in-lbs) maximum
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
GBPC
6005
GBPC
601
GBPC
602
GBPC
604
GBPC
606
GBPC
608
GBPC
610
UNIT
Maximum repetitive peak reverse voltage
V_RRM
50
100
200
400
600
800 1000 V
Maximum RMS bridge input voltage
V_RMS
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
V_DC
50
100
200
400
600
800 1000 V
Maximum average forward
rectified output current at
T_C = 50 °C ⁽¹⁾⁽²⁾
T_A = 40 °C ⁽³⁾
I_F(AV)
6.0
3.0
A
Peak forward surge current single sine-wave 
superimposed on rated load
I_FSM
175
A
Rating for fusing (t = 8.3 ms)
I²t
127
A²s
Operating junction and storage temperature range T_J, T_STG
- 55 to + 150
°C
Notes
(1) _{Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw}
(2) _{Unit mounted on 5.5" x 6.0" x 0.11" thick (14 cm x 15 cm x 0.3 cm) aluminum plate}
(3) _{Unit mounted on PCB at 0.375" (9.5 mm) lead length with 0.5" x 0.5" (12 mm x 12 mm) copper pads}
Revision: 08-Jul-13
1
Document Number: 88613
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000