FRJ55R36 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Metal Film Resistors, Zero Ohm Jumper, Industrial

www.vishay.com
FRJ
Vishay Dale
Metal Film Resistors,
Zero Ohm Jumper, Industrial
FEATURES
• Provides low resistance circuit interconnections
• Color band marking for ease of identification
after mounting
• Flame retardant coating
• Compatible with automatic insertion equipment
• Tape and reel packaging
• Material categorization: 
For definitions of compliance please see
www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL 
MODEL
HISTORICAL
MODEL
MAXIMUM RESISTANCE VALUE
m
MAXIMUM CURRENT A
AT + 25 °C
AT + 150 °C
FRJ50
FRJ-50
10
25
0
Note
• DSCC has created a drawing to support the need for an axial-leaded zero-ohm jumper product. Vishay Dale is listed as a resource on this
drawing as follows:
DSCC
DRAWING
NUMBER
VISHAY DALE
MODEL
MAXIMUM RESISTANCE
m
MAXIMUM CURRENT RATING
A
A-A-55502
FRJ50
10
5
This drawing can be viewed at: http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg
TECHNICAL SPECIFICATIONS
PARAMETER
Insulation Resistance - Dry
Insulation Resistance - Wet
Category Temperature Range
Dielectric Strength
- Atmospheric
- Reduced
Failure Rate
Weight
UNIT
M
M
°C
V_RMS
V_RMS
10^-9/h
g
FRJ50
10 000
100
- 55/+ 155
500
325
< 10
0.1
MATERIAL SPECIFICATIONS
Insulation Flammability
Self extinguishing 10 s after flame
is removed
Solder plated copper
Tin-plated copper or tin/lead plated copper
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FRJ50R36 (preferred part numbering format)
F RJ 5 0 R 3 6
GLOBAL MODEL
FRJ50
PACKAGING
E36 = Lead (Pb)-free, T/R (5000 pieces)
R36 = Tin/Lead, T/R (5000 pieces)
Historical Part Number example: FRJ-50 R36 (will continue to be accepted)
FRJ-50
R36
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 - 999
as applicable
HISTORICAL MODEL
PACKAGING
Note
• For additional information on packaging, refer to the Through-Hole Resistor Packaging document (www.vishay.com/doc?31544).
Revision: 24-Oct-12
1
Document Number: 31016
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000