ERL_15 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Metal Film Resistors, Military/Established Reliability, MIL-PRF-39017 Qualified, Type RLR

www.vishay.com
ERL (Military RLR)
Vishay Dale
Metal Film Resistors, Military/Established Reliability,
MIL-PRF-39017 Qualified, Type RLR
FEATURES
• Meets requirements of MIL-PRF-39017
• Failure rate: Verified failure rate (contact factory for current
level)
• Epoxy coated construction provides superior moisture
protection
• Traceability of materials and processing
• Monthly lot acceptance testing
• Very low noise (-40 dB)
• Extensive stocking program at distributors and factory in
± 1 % and ± 2 % tolerances
• Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
ERL05,
ERL05..19 ⁽³⁾
ERL07,
ERL07..23 ⁽³⁾
ERL20,
ERL20..11 ⁽³⁾
ERL32,
ERL32..1 ⁽³⁾
MIL-PRF-39017
STYLE
MIL
SPEC.
SHEET
RLR05
05
RLR07
01
RLR20
02
POWER
RATING
70 °C
W
0.125
0.25
0.50
RESISTANCE
RANGE ⁽¹⁾

4.7 to 301K
302K to 1M
1 to 9.76
10 to 3.01M
3.02M to 10M
4.3 to 3.01M
TOLERANCE
±%
1, 2
1, 2
1, 2
TEMPERATURE
COEFFICIENT
± ppm/°C
100
100
100
MAXIMUM
WORKING
VOLTAGE ⁽⁴⁾
V
200
250
350
LIFE
FAILURE
RATE ⁽²⁾
M, P, R, S
M, P, R
M
M, P, R, S
M, P, R
M, P, R, S
RLR32
03
1.0
1 to 2.7M
1, 2
100
500
M, P, R
Notes
(1) _{Extended Resistance Range: DSCC has created a series of drawings intended to support extended resistance ranges left otherwise void by ï€} 
the discontinuation of MIL-R-39008 RCR carbon composition resistors. Vishay Dale is listed as a resource on these drawings as follows:
DSCC
DRAWING
NUMBER
98020
99011
98021
98022
VISHAY DALE
MODEL
ERL05..36, ERL05..37 ⁽³⁾
ERL07..100, ERL07..101 ⁽³⁾
ERL20..36, ERL20..37 ⁽³⁾
ERL32..36, ERL32..37 ⁽³⁾
POWER RATING
P_{70 °C}
W
0.125
0.25
0.50
1.0
RESISTANCE
RANGE

1.1M to 22M
11M to 22M
3.3M to 22M
3M to 22M
TOLERANCE
±%
2, 5, 10
2, 5, 10
2, 5, 10
2, 5, 10
TEMPERATURE
COEFFICIENT
± ppm/°C
350
350
350
350
MAXIMUM
WORKING
VOLTAGE
V ⁽⁴⁾
200
250
350
350
97004
ERL62..1, ERL62..2 ⁽³⁾
2.0
10 to 2.7M
3M to 22M
1, 2, 5, 10
100
350
500
• Low inductance: DSCC has created a drawing intended to support a resistor which exhibits low inductance over a frequency range of 1 MHz
to 30 MHz. Vishay Dale is listed as a resource on these drawings as follows:
DSCC
DRAWING
NUMBER
VISHAY DALE
MODEL
POWER
RATING
P_{70 °C}
W
RESISTANCE MAXIMUM
RANGE INDUCTANCE

nH
TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
MAXIMUM
WORKING
VOLTAGE
V ⁽⁴⁾
1 to 10
10
96002
ERL07..62
0.25
11 to 49.9
8
1, 2
100
250
These drawings can be viewed at: http://www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg
(2) _{Consult factory for current QPL failure rates}
(3) _{Hot solder dipped leads}
(4) _{Continuous working voltage shall be P x R or maximum working voltage, whichever is less.}
TECHNICAL SPECIFICATIONS
PARAMETER
Voltage Coefficient, max.
Dielectric Strength
Insulations Resistance
Operating Temperature Range
Terminal Strength
Solderability
Weight
UNIT
ppm/V
V_AC

°C
lb
g
CONDITION
5/V when measured between 10 % and full rated voltage
RLR05 = 300; RLR07 and RLR20 = 500; RLR32 = 1000
 10⁹ min. dry;  10¹¹ min. after moisture test
-65 to +150
2 lb pull test on RLR05; 5 lb pull test on all other sizes
Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208
RLR05 = 0.11; RLR07 = 0.35; RLR20 = 0.75; RLR32 = 1.05
Revision: 25-Aug-15
1
Document Number: 31023
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000