ERC Datasheet, PDF (1/3 Pages) Vishay Siliconix – Metal Film Resistors, Military/Established Reliability, MIL-PRF-55182 Qualified, Type RNC, Characteristics J, H, K

ERC (Military RNC/RNR)
Vishay Dale
Metal Film Resistors, Military/Established Reliability,
MIL-PRF-55182 Qualified, Type RNC, Characteristics J, H, K
FEATURES
• Meets requirements of MIL-PRF-55182
• Very low noise (- 40 dB)
• Verified Failure Rate (Contact factory for current level)
• 100 % stabilization and screening tests. Group A testing, if
desired, to customer requirements
• Controlled temperature coefficient
• Epoxy coating provides superior moisture protection
• Standard lead on RNC product is solderable and weldable
• Traceability of materials and processing
• Monthly acceptance testing
• Vishay Dale has complete capability to develop specific
reliability programs designed to customer requirements
• Extensive stocking program at distributors and factory on
RNC50, RNC55, RNC60 and RNC65
• For MIL-PRF-55182 Characteristics E and C product, see
Vishay Angstrohm’s HDN (Military RNR/RNN) data sheet
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
DALE
MODEL
POWER
MIL-PRF-55182 ^RATING
TYPE
P_{70 °C} P_{125 °C}
W
W
RESISTANCE
TOLERANCE
%
MAXIMUM
WORKING
VOLTAGE
RESISTANCE RANGE (Ω) ⁽¹⁾
100 ppm/°C
(K)
50 ppm/°C
(H)
25 ppm/°C
(J)
ERC50
RNC50, RNR50 0.10 0.05 ± 0.1, ± 0.5, ± 1 200
10R - 796K
10R - 796K 10R - 796K
ERC55
RNC55, RNR55 0.125 0.10 ± 0.1, ± 0.5, ± 1 200
10R - 2M0
10R - 2M0
10R - 2M0
ERC55..200 RNC60, RNR60 0.25 0.125 ± 0.1, ± 0.5, ± 1 250
10R - 3M01 10R - 3M01 10R - 3M01
ERC65
RNC65, RNR65 0.50 0.25 ± 0.1, ± 0.5, ± 1 300
10R - 3M01 10R - 3M01 10R - 3M01
ERC70
RNC70, RNR70 0.75 0.50 ± 0.1, ± 0.5, ± 1 350
10R - 3M01 10R - 3M01 10R - 3M01
Note
(1)_{Consult factory for current QPL failure rates}
Standard resistance tolerances: ± 0.1 % (B), ± 0.5 % (D) and ± 1 % (F). ± 0.1 % not applicable to Characteristic K
LIFE
FAILURE
RATE ⁽¹⁾
M, P, R, S
M, P, R, S
M, P, R, S
M, P, R
M, P, R
TECHNICAL SPECIFICATIONS
PARAMETER
Voltage Coefficient, max.
Dielectric Strength
Insulations Resistance
Operating Temperature Range
Terminal Strength
Solderability
Weight
UNIT
ppm/°C
V_AC
Ω
°C
lb
g
CONDITION
5/V when measured between 10 % and full rated voltage
RNC50, RNC55 and RNC60 = 450; RNC65 and RNC70 = 900
≥ 10¹¹ dry; ≥ 10⁹ after moisture test
- 65 to + 175
2 lb pull test on RNC50, RNC55, RNC60 and RNC65; 4.5 lb pull test on RNC70
Continuous satisfactory coverage when tested in accordance with MIL-STD-202, Method 208
RNC50 = 0.11; RNC55 = 0.35; RNC60 = 0.35; RNC65 = 0.84; RNC70 = 1.60
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format)
R N C 55 H 2 1 5 2 F R R 3 6
MIL STYLE
RNC = Solderable/
Weldable
RNR = Solderable
only
(see Standard
Electrical
Specifications
table)
CHARACTERISTICS
RESISTANCE
VALUE
J = ± 25 ppm 3 digit significant
H = ± 50 ppm figure, followed
K = ± 100 ppm by a multiplier
10R0 = 10 Ω
2152 = 21.5 k Ω
3014 = 3.01 MΩ
TOLERANCE
CODE
B = ± 0.1 %
D = ± 0.5 %
F=±1%
FAILURE
RATE
M = 1.0 %/1000 h
P = 0.1 %/1000 h
R = 0.01 %/1000 h
S = 0.001 %/1000 h
Historical Part Number example: RNC55H2152FR R36 (will continue to be accepted)
PACKAGING
B14 = Tin/Lead, Bulk
BSL = Tin/Lead, Bulk,
Single Lot Date Code
R36 = Tin/Lead,
T/R (Full; 50, 55, 60)
R64 = Tin/Lead,
T/R (Full; 65, 70)
RE6 = Tin/Lead,
T/R (1000 pieces)
RSL = Tin/Lead, T/R,
Single Lot Date Code
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1 - 999
as applicable
4 = Hot Solder Dip (70’s)
31= Hot Solder Dip (50’s)
65 = Hot Solder Dip (55’s)
65 = Hot Solder Dip (65’s)
201= Hot Solder Dip (60’s)
RNC55
H
2152
F
R
R36
MIL STYLE
www.vishay.com
52
CHARACTERISTIC
RESISTANCE VALUE TOLERANCE CODE
FAILURE RATE
PACKAGING
For technical questions, contact: [e-mail]
Document Number: 31025
Revision: 08-Jul-08