DG401 Datasheet, PDF (1/12 Pages) Intersil Corporation – Monolithic CMOS Analog Switches

DG401/403/405
Vishay Siliconix
Low-Power, High-Speed CMOS Analog Switches
DESCRIPTION
The DG401/403/405 monolithic analog switches were
designed to provide precision, high performance switching of
analog signals. Combining low power (0.35 µW, typ) with
high speed (t_ON: 75 ns, typ), the DG401 series is ideally
suited for portable and battery powered industrial and
military applications.
Built on the Vishay Siliconix proprietary high-voltage
silicon-gate process to achieve high voltage rating and
superior switch on/off performance, break-before-make is
guaranteed for the SPDT configurations. An epitaxial layer
prevents latchup.
Each switch conducts equally well in both directions when
on, and blocks up to 30 V peak-to-peak when off. On-
resistance is very flat over the full ± 15 V analog range,
rivaling JFET performance without the inherent dynamic
range limitations.
The three devices in this series are differentiated by the type
of switch action as shown in the functional block diagrams.
FEATURES
• 44 V Supply Max Rating
• ± 15 V Analog Signal Range
• On-Resistance - r_DS(on): 30 Ω
• Low Leakage - I_D(on): 40 pA
• Fast Switching - t_ON: 75 ns
• Ultra Low Power
Requirements - P_D: 0.35 µW
• TTL, CMOS Compatible
• Single Supply Capability
BENEFITS
• Wide Dynamic Range
• Break-Before-Make Switching Action
• Simple Interfacing
APPLICATIONS
• Audio and Video Switching
• Sample-and-Hold Circuits
• Battery Operation
• Test Equipment
• Communications Systems
• PBX, PABX
Pb-free
Available
RoHS*
COMPLIANT
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG401
Dual-In-Line and SOIC
D_{1 1}
NC ₂
NC ₃
NC ₄
NC ₅
NC ₆
NC ₇
D_{2 8}
16 ^S1
15 ^IN1
14 ^V-
13 ^GND
12 ^VL
11 ^V+
10 ^IN2
9 ^S2
Top View
DG401
LCC
NC D₁ NC S₁ IN₁
Key
3 2 1 20 19
NC ⁴
NC ⁵
NC ⁶
NC ⁷
NC ⁸
9 10 11 12 13
18 _{V- Two SPST Switches per Package}
17 _{GND TRUTH TABLE}
16 _NC
Logic
Switch
15 _VL
14 _V+
0
1
Logic "0" ≤ 0.8 V
Logic "1" ≥ 2.4 V
OFF
ON
NC D₂ NC S₂ IN₂
Top View
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 70049
S-71155–Rev. H, 11-Jun-07
www.vishay.com
1