DG3000 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Low-Voltage Single SPDT MICRO FOOT Analog Switch

DG3000
Vishay Siliconix
Low-Voltage Single SPDT MICRO FOOTtAnalog Switch
FEATURES
D MICRO FOOT Chip Scale Package
(1.07 x 1.57 mm)
D Low Voltage Operation (1.8 V to 5.5 V)
D Low On-Resistance - r_DS(on): 1.4 W
D Fast Switching - t_ON : 24 ns, t_OFF: 9 ns
D Low Power Consumption
D TTL/CMOS Compatible
BENEFITS
D Reduced Power Consumption
D Simple Logic Interface
D High Accuracy
D Reduce Board Space
APPLICATIONS
D Cellular Phones
D Communication Systems
D Portable Test Equipment
D Battery Operated Systems
D PCM Cards
D PDA
DESCRIPTION
The DG3000 is a single-pole/double-throw monolithic CMOS
analog switch designed for high performance switching of
analog signals. Combining low power, high speed (t_ON: 24 ns,
t_OFF: 9 ns), low on-resistance (r_DS(on): 1.4 W) and small
physical size (MICRO FOOT, 6-bump), the DG3000 is ideal for
portable and battery powered applications requiring high
performance and efficient use of board space.
The DG3000 is built on Vishay Siliconix’s low voltage JI2
process. An epitaxial layer prevents latchup. Break-before
-make is guaranteed for DG3000.
Each switch conducts equally well in both directions when on,
and blocks up to the power supply level when off.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
MICRO FOOT
(6-Bump)
IN
B1
V+
B2
GND
B3
A1
NO (Source₁)
A2
COM
A3
NC (Source₂)
Top View
A1 Locator
TRUTH TABLE
Logic
NC
NO
0
ON
OFF
1
OFF
ON
ORDERING INFORMATION
Temp Range
Package
Part Number
-40 to 85°C
MICRO FOOT: 6-Bump
(2 x 3, 0.5-mm Pitch)
DG3000DB
Device Marking: 3000
xxx = Date/Lot Traceability Code
Document Number: 71742
S-21483—Rev. C, 26-Aug-02
www.vishay.com
1