DG2722 Datasheet, PDF (1/8 Pages) Vishay Siliconix – 2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch

DG2722
Vishay Siliconix
2 Port, USB 2.0 High Speed (480 Mbps) Switch,
DPDT Analog Switch
DESCRIPTION
The DG2722 is 2 port high speed analog switch optimized for
USB 2.0 signal switching. The DG2722 switch is configured
in DPDT. It handles bidirectional signal flow, achieving a
900 MHz - 3 dB bandwidth, and a port to port crosstalk and
isolation at - 49 dB.
Processed with high density sub micron CMOS, the DG2722
provide low parasitic capacitance. Signals are routed with
minimized phase distortion and attain a bit to bit skew is as
low as 40 pS.
The DG2722 is designed for a wide range of operating
voltages, from 2.7 V to 4.3 V that can be driven directly from
one cell Li-ion battery. On-chip circuitry protects against
conditions when either the D+/D- lines are shorted to the
V_BUS at the USB port. Additionally, logic control pins (S and
OE) can tolerate the presence of voltages that are above the
supply power rail (V+). The control logic threshold is
guaranteed to be (V_IH = 1.3 V/min). Latch up current is
300 mA, as per JESD78, and its ESD tolerance exceeds
8 kV.
Packaged in ultra small miniQFN-10 (1.4 mm x 1.8 mm x
0.55 mm), it is ideal for portable high speed mix signal
switching application.
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product with
lead (Pb)-free device termination. The miniQFN-10 package
has a nickel-palladium-gold device termination and is
represented by the lead (Pb)-free "-E4" suffix to the ordering
part number. The nickel-palladium-gold device terminations
meet all JEDEC standards for reflow and MSL rating.
As a further sign of Vishay Siliconix's commitment, the
DG2722 is fully RoHS complaint.
FEATURES
• Wide operation voltage range
• Low on-resistance, 7 Ω (typical at 3 V)
• Low capacitance, 5.6 pF (typical)
• 3 dB high bandwidth: 900 MHz (typical)
RoHS
COMPLIANT
• Low bit to bit skew: 40 pS (typical)
• Low power consumption
• Low logic threshold: V
• Power down protection: D+/D- pins can tolerate up to
5 V when V+ = 0 V
• Logic (S and OE) above V+ tolerance
• 8 kV ESD protection (HBM)
• Latch-up current 300 mA per JESD78
• Lead (Pb)-free low profile miniQFN-10 (1.4 mm x 1.8 mm
x 0.55 mm)
APPLICATIONS
• Cellular phones
• Portable media players
• PDA
• Digital camera
• GPS
• Notebook computer
• TV, monitor, and set top box
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
miniQFN-10L
OE 8
V+ ₉
S 10
Pin 1: LONG LEAD
Document Number: 68379
S-82507-Rev. B, 13-Oct-08
7
6
1
2
Top View
5 HSD2+
4 HSD2-
Rx
3 GND
Pin 1
Device marking: Rx for DG2722
x = Date/Lot Traceability Code
www.vishay.com
1