English
Language : 

DFN Datasheet, PDF (1/3 Pages) Vishay Siliconix – Low profile 1 mm seated height
www.vishay.com
DFN
Vishay Dale Thin Film
Dual Flat No Lead Molded Precision Thin Film Resistor
Surface Mount Network
The DFN series of precision surface mount resistor networks
feature isolated thin film precision resistors mounted in a
0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The
networks feature 50 % savings in board space over
traditional SOIC packages. They are ideally suited for
applications of unity gain operational amplifiers that require
close TC tracking and tight ratio tolerances over
temperature. Custom configurations are available upon
request.
SCHEMATIC
8765
R1 R1 R1 R1
1234
FEATURES
• 0.8 mm lead pitch
• MSL level 1 per J-STD-020
• Low profile 1 mm seated height
• Small size 4 mm x 4 mm size 50 % board savings
over SOIC packages
• Wide resistance range 100  to 100 k available
• Custom configurations available
• Low TCR ± 25 ppm, TCR tracking to ± 3 ppm
• Ratio tolerances to ± 0.025 %
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
25
ABSOLUTE
0.1
TRACKING
3
RATIO
0.05
STANDARD RESISTANCE OFFERING (R1 =)
500 
10 k
1 k
2 k
20 k
50 k
4.99 k
100 k
5 k
Note
• Consult factory for additional R values and schematics
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Passivated nichrome
Pin/Lead Number
8
Resistance Range
100  to 100 k per resistor
TCR: Absolute
± 25 ppm/°C
TCR: Tracking
± 3 ppm/°C
Tolerance: Absolute
± 0.05 % to ± 1.0 %
Tolerance: Ratio
± 0.025 % to ± 0.5 %
Power Rating: Resistor
100 mW
Power Rating: Package
100 mW x number of resistors
Stability: Absolute
R ± 0.05 %
Stability: Ratio
R ± 0.015 %
Voltage Coefficient
< 0.1 ppm/V
Working Voltage
100 V max. not to exceed P x R
Operating Temperature Range
-55 °C to +125 °C
Storage Temperature Range
-55 °C to +150 °C
Noise
< -30 dB
Thermal EMF
< 0.08 μV/°C
Shelf Life Stability: Absolute
R ± 0.01 %
Shelf Life Stability: Ratio
R ± 0.002 %
CONDITIONS
-
-
-
-55 °C to +125 °C
-55 °C to +125 °C
+25 °C
+25 °C
Maximum at +70 °C
Maximum at +70 °C
2000 h at +70 °C
2000 h at +70 °C
-
-
-
-
-
-
1 year at +25 °C
1 year at +25 °C
Revision: 28-May-15
1
Document Number: 60109
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000