CSC05 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Resistor Networks Single-In-Line, Coated SIP 01, 03, 05 Schematics

CSC
Vishay Dale
Thick Film Resistor Networks
Single-In-Line, Coated SIP 01, 03, 05 Schematics
FEATURES
• 0.195" [4.95mm] "A", 0.250" [6.35mm] "B"
• "A" profile standard in 4 thru 12 pins
• Highly stable thick film
• Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C
• Reduces total assembly costs
• Resistor elements protected by tough epoxy conformal coating
• Wide resistance range
• Available in bag pack or tube pack
STANDARD ELECTRICAL SPECIFICATIONS
MODEL/
PROFILE
SCHEMATIC
RESISTOR RESISTANCE STANDARD TEMPERATURE
TCR
POWER RATING RANGE
TOLERANCE COEFFICIENT
TRACKING
Max. @ 70°C*
Ω
%
(- 55°C to + 125°C) (- 55°C to + 125°C)
CSC01
A
B
0.20 W
0.25 W
10 - 2.2M
± 2 (1%*)
± 100ppm/°C
± 50ppm/°C
CSC03
A
B
0.30 W
0.40 W
10 - 2.2M
± 2 (1%*)
± 100ppm/°C
± 50ppm/°C
CSC05
A
B
0.20 W
0.25 W
10 - 2.2M
± 2 (1%*)
± 100ppm/°C
± 150ppm/°C
* For resistor power ratings @ + 25°C see derating curves.
• See derating curves for Package Power Rating. Higher power rated “C” Profile available.
* Contact factory for 1%
OPERATING
VOLTAGE
VDC Max.
100
100
100
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
Voltage Coefficient of Resistance
Dielectric Strength
V_eff
VAC
Isolation Resistance (03 Schematic)
Ω
Operating Temperature Range
°C
CSC Series
< 50ppm typical
200
> 100M
- 55 to + 125
ORDERING INFORMATION
01 and 03 Schematics
CSC
MODEL
08
NUMBER OF
PINS
A
PACKAGE CODE
A = 0.195" [4.95mm] Height
0.100" [2.54mm] Lead Spacing
B = 0.250" [6.35mm] Height
0.100" [2.54mm] Lead Spacing
01
03
SCHEMATIC
01 = Pin #1
common to all
resistors
03 = Isolated
resistors
101
RESISTANCE
VALUE
First 2 digits are
significant figures.
Last digit specifies
number of zeros to
follow.
G
TOLERANCE
G= ± 2%
05 Schematic
CSC
08
MODEL
NUMBER OF
PINS
A
PACKAGE CODE
A = 0.195" [4.95mm] Height
0.100" [2.54mm] Lead Spacing
B = 0.250" [6.35mm] Height
0.100" [2.54mm] Lead Spacing
05
SCHEMATIC
221
331
RESISTANCE RESISTANCE
VALUE R₁
VALUE R₂
First two digits are significant
figures. The third digit
specifies the number of
zeros to follow.
G
TOLERANCE
G= ± 2%
www.vishay.com
32
For Technical Questions, contact: [e-mail]
Document Number: 31509
Revision 02-Aug-02