CS22_15 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Single Value Wirebondable Thin Film Chip Resistors

www.vishay.com
CS22
Vishay Sfernice
Single Value Wirebondable Thin Film Chip Resistors
Actual Size
Chromium silicon thin film is very well suited to produce high
density and high ohmic value resistor chips. These high
ohmic value chip resistors are available with improved
performances and size when compared to thick film
counterparts.
SCHEMATIC AND PATTERN
FEATURES
• Small size 20 mil x 20 mil
• Very high ohmic value up to 10 M
• Aluminum or gold terminations
• Good stability 0.1 % (2000 h, rated power at
+ 70 °C)
• Wirebondable
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
R
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE

RATED POWER
P_{70 °C}
W
CS22
0202
10K to 10M
0.05
Note
(1) _{Higher on Al2O3}
CLIMATIC SPECIFICATIONS
Operating temperature
range
- 55 °C to + 155 °C
Storage temperature range
- 55 °C to + 155 °C
DIMENSIONS in millimeters (inches)
0.58 ± 0.05
(23 ± 2)
0.43
(17.2)
LIMITING ELEMENT
VOLTAGE
V
100 ⁽¹⁾
TOLERANCE
±%
0.5, 1, 2
TEMPERATURE
COEFFICIENT
± ppm/°C
50, 100
MECHANICAL SPECIFICATIONS
Resistive element
Chromium silicon
Passivation
Silicon nitride
Substrate material
Bonding pads
Silicon (consult Vishay for Al₂O₃)
Aluminum or gold
0.58 ± 0.05
(23 ± 2)
0.47
(18.8)
0.58 ± 0.05 0.43
(23 ± 2) (17.2)
Type A (Current)
0.58 ± 0.05 0.47
(23 ± 2) (18.8)
0.08 min.
(3.2 min.)
Type B (New)
0.125 min.
(5 min.)
0.08 min.
(3.2 min.)
0.10 min.
(4 min.)
Note
• Customer can get one or the other part, but positions of pads are similar.
Revision: 21-Nov-13
1
Document Number: 60063
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000