CRHV Datasheet, PDF (1/4 Pages) Vishay Siliconix – High Voltage Chip Resistors

www.vishay.com
CRHV
Vishay Techno
Thick Film Chip Resistors, High Voltage
FEATURES
• High voltage up to 3000 V
• Outstanding stability < 0.5 %
• Flow solderable
Available
• Custom sizes available
Available
• Automatic placement capability
• Tape and reel packaging available
• Termination style: 3-sided wraparound termination or
single termination flip chip standard; 5-sided wraparound
termination available
• Internationally standardized sizes
• Suitable for solderable, epoxy bondable, or wire bondable
applications
• Termination material: solder-coated nickel barrier or
solder coated non-magnetic terminations standard; gold,
palladium silver, platinum gold, platinum silver or platinum
palladium gold terminations available
• Multiple styles, termination materials and configurations,
allow wide design flexibility
• Epoxy bondable or wire bondable non-magnetic
terminations available
Note
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
* This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL 
MODEL
CASE SIZE
POWER RATING
P_{70 °C}
W
MAXIMUM
WORKING
VOLTAGE ⁽¹⁾
V
RESISTANCE
RANGE ⁽²⁾

TOLERANCE ⁽³⁾
±%
TEMPERATURE
COEFFICIENT ⁽⁴⁾
(-55 °C to +155 °C)
± ppm/°C
CRHV1206
1206
0.30
2M to 100M
0.5
1500
2M to 1G
1, 2, 5, 10, 20
100
1.1G to 8G
2, 5, 10, 20
CRHV1210
1210
0.45
4M to 100M
0.5
1750
4M to 1G
1, 2, 5, 10, 20
100
1.1G to 10G
2, 5, 10, 20
CRHV2010
2010
0.50
6M to 100M
0.5
6M to 1G
1, 2, 5, 10, 20
2000
100
1.1G to 10G
2, 5, 10, 20
11G to 35G
10M to 100M
5, 10, 20
0.5
CRHV2510
2510
0.60
10M to 1G
1, 2, 5, 10, 20
2500
100
1.1G to 10G
2, 5, 10, 20
11G to 40G
5, 10, 20
12M to 100M
0.5
CRHV2512
2512
1.0
12M to 1G
1, 2, 5, 10, 20
3000
100
1.1G to 10G
2, 5, 10, 20
11G to 50G
5, 10, 20
Notes
• For non-standard sizes, lower values or higher power rating requirement, contact factory.
(1) _{Continuous working voltage shall be P x R or maximum working voltage, whichever is less.}
(2) _{Resistance values below 1 G are calibrated at 100 VDC, and values of 1 G and above are calibrated at 1000 VDC. Calibration at other}
voltages available upon request.
(3) _{Contact factory for tighter tolerances.}
(4) _{Reference only: Not for all values specified. Consult factory for your size and value.}
Revision: 02-Oct-14
1
Document Number: 68002
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000