CRCW120610R0FKEAHP Datasheet, PDF (1/6 Pages) Vishay Siliconix – Pulse Proof, High Power Thick Film Chip Resistors

www.vishay.com
CRCW-HP e3
Vishay Draloric
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
• Excellent pulse load capability
• Enhanced power rating
• Double side printed resistor element
• Protective overglaze
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• AEC-Q200 qualified, rev. C compliant
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CASE CASE
SIZE SIZE
INCH METRIC
POWER RATING
P₇₀
W
LIMITING
ELEMENT
VOLTAGE
U_max. AC/DC
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE

SERIES
0.125 ⁽¹⁾
50
CRCW0402-HP e3 0402 RR1005
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.010 , I_max. = 3 A
CRCW0603-HP e3 0603 RR1608
0.25
± 100
± 0.5, ± 1
E24; E96
75
± 200
±5
1 to 1M
E24
Zero-Ohm-Resistor: R_max. = 0.008 , I_max. = 5 A
CRCW0805-HP e3 0805 RR2012
0.33
150
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.005 , I_max. = 6 A
CRCW1206-HP e3 1206 RR3216
0.5
200
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.005 , I_max. = 10 A
CRCW1210-HP e3 1210 RR3225
0.75
200
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.004 , I_max. = 12 A
CRCW1218-HP e3 1218 RR3246
1.5
200
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.004 , I_max. = 20 A
CRCW2010-HP e3 2010 RR5025
1.0
400
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.005 , I_max. = 12 A
CRCW2512-HP e3 2512 RR6332
1.5
500
± 100
± 200
± 0.5, ± 1
±5
1 to 1M
E24; E96
E24
Zero-Ohm-Resistor: R_max. = 0.005 , I_max. = 16 A
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• Marking: See document “Surface Mount Resistor Marking” (document number 20020).
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
(1) _{CRCW0402-HP resistors feature a single side printed resistive layer only.}
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRCW
0402-HP
CRCW
0603-HP
CRCW
0805-HP
CRCW
1206-HP
CRCW
1210-HP
CRCW
1218-HP
CRCW
2010-HP
CRCW
2512-HP
Rated dissipation P₇₀ ⁽²⁾
Limiting element voltage U_max. AC/DC
Insulation voltage U_ins. (1 min)
Insulation resistance
W 0.125
0.25
0.33
0.5
0.75
1.5
1.0
1.5
V
50
75
150
200
200
200
400
500
V
> 75
> 100 > 200 > 300 > 300 > 300 > 300 > 300

> 10⁹
Category temperature range
°C
- 55 to + 155
Weight
mg 0.65
2
5.5
10
18
31
25.5
42
Note
(2) _{The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
Revision: 21-Mar-13
1
Document Number: 20043
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000