CRCW08051M00FKEA Datasheet, PDF (1/8 Pages) Vishay Siliconix – Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors

D/CRCW
Vishay
Lead (Pb)-Bearing Thick Film, Rectangular Chip Resistors
FEATURES
• Stability ΔR/R = 1 % for 1000 h at 70 °C
• Lead (Pb)-bearing termination plating on Ni barrier layer
• Metal glaze on high quality ceramic
• Halogen-free according to IEC 61249-2-21 definiton
• AEC-Q200 qualified, rev. C compliant
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
INCH METRIC
RATED DISSIPATION
P₇₀
W
LIMITING
ELEMENT
VOLTAGE
U_max. AC/DC
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
Ω
SERIES
D10/CRCW0402 0402 RR 1005M
D11/CRCW0603 0603 RR 1608M
D12/CRCW0805 0805 RR 2012M
D25/CRCW1206 1206 RR 3216M
CRCW1210
1210 RR 3225M
CRCW1218
1218 RR 3246M
CRCW2010
2010 RR 5025M
CRCW2512
2512 RR 6332M
0.063
50
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 1.5 A
0.10
75
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 2.0 A
0.125
150
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 2.5 A
0.25
200
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 3.5 A
0.50
200
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 5.0 A
1.0
200
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 7.0 A
0.75
400
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 6.0 A
1.0
500
± 100
± 200
Zero-Ohm-Resistor: R_max. = 20 mΩ, I_max. = 7.0 A
±1
±5
1R0 to 10M
E24; E96
E24
±1
±5
1R0 to 10M
E24; E96
E24
±1
±5
1R0 to 10M
E24; E96
E24
±1
±5
1R0 to 10M
E24; E96
E24
±1
±5
1R0 to 10M
E24; E96
E24
±1
±5
1R0 to 2M2
E24; E96
E24
±1
±5
1R0 to 10M
E24; E96
E24
±1
±5
1R0 to 10M
E24; E96
E24
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• Marking: See datasheet “Surface Mount Resistor Marking” (document number 20020).
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
www.vishay.com
118
For technical questions, contact: [e-mail]
Document Number: 20008
Revision: 18-Nov-10