CRCW0402220RFKEAHP Datasheet, PDF (1/6 Pages) Vishay Siliconix – Pulse Proof, High Power Thick Film Chip Resistors

CRCW....-HP e3
Vishay
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
• Excellent pulse load capability
• Enhanced power rating
• Double side printed resistor element
• Protective overglaze
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compliant to RoHS directive 2002/95/EC
• AEC-Q200, rev. C compliant
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
INCH METRIC
POWER RATING
P₇₀
W
LIMITING
ELEMENT
VOLTAGE
MAX. V
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
Ω
E-SERIES
0.125 ⁽¹⁾
50
± 100
±1
CRCW0402-HP e3 0402 1005
± 200
±5
Zero-Ohm-Resistor: R_max. = 0.010 Ω, I_max. = 2.5 A
0.25
CRCW0603-HP e3 0603 1608
75
± 100
± 200
±1
±5
Zero-Ohm-Resistor: R_max. = 0.010 Ω, I_max. = 4 A
± 100
±1
0.33
150
CRCW0805-HP e3 0805 2012
± 200
±5
Zero-Ohm-Resistor: R_max. = 0.010 Ω, I_max. = 5 A
± 100
±1
0.5
200
CRCW1206-HP e3 1206 3216
± 200
±5
Zero-Ohm-Resistor: R_max. = 0.010 Ω, I_max. = 6 A
± 100
±1
1.0
400
CRCW2010-HP e3 2010 5025
± 200
±5
Zero-Ohm-Resistor: R_max. = 0.010 Ω, I_max. = 10 A
± 100
±1
1.5
500
CRCW2512-HP e3 2512 6332
± 200
±5
Zero-Ohm-Resistor: R_max. = 0.010 Ω, I_max. = 14 A
1R to 1M
E24 + E96
E24
1R to 1M
E24 + E96
E24
1R to 1M
E24 + E96
E24
1R to 1M
E24 + E96
E24
1R to 1M
E24 + E96
E24
1R to 1M
E24 + E96
E24
Notes
(1) _{CRCW0402-HP resistors feature a single side printed resistive layer only}
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
• Marking and packaging: see appropriate catalog or web page
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation P₇₀ ⁽¹⁾
Limiting Element Voltage
U_max. AC/DC
Insulation Voltage U_ins. (1 min)
Insulation Resistance
UNIT CRCW0402-HP CRCW0603-HP CRCW0805-HP CRCW1206-HP CRCW2010-HP CRCW2512-HP
W
0.125
0.25
0.33
0.5
1.0
1.5
V
50
75
150
200
400
500
V
> 75
Ω
> 100
> 200
> 10⁹
> 300
Category Temperature Range °C
- 55 to + 155
Weight
mg
0.65
2
5.5
10
25.5
42
Note
(1) _{The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
www.vishay.com
1
For technical questions, contact: [e-mail]
Document Number: 20043
Revision: 07-May-09