CRCW02012K20JNED Datasheet, PDF (1/6 Pages) Vishay Siliconix – Lead (Pb)-free Commodity Thick Film Chip Resistors

www.vishay.com
CRCW0201 e3
Vishay
Lead (Pb)-free Commodity Thick Film Chip Resistors
FEATURES
• High volume product suitable for commercial
applications
• Pure tin solder contacts on Ni barrier layer
provides compatibility with lead (Pb)-free and
lead containing soldering processes
• Metal glaze on high quality ceramic
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CASE CASE
SIZE SIZE
INCH METRIC
POWER RATING
P₇₀
W
LIMITING
ELEMENT
VOLTAGE
U_max.
AC_RMS/DC
V
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE

SERIES
± 200
- 200/+ 400
± 0.5
10.0 to 10M
E96
1.0 to 9.76
± 100
47.0 to 10M
0.05
CRCW0201 0201 RR 0603M
30
± 200
±1
10.0 to 10M E24; E96
- 200/+ 400
1.0 to 9.76
± 200
- 200/+ 400
10.0 to 10M
±5
E24
1.0 to 9.76
Zero-Ohm-Resistor: R_max. = 50 m, I_max. at 70 °C = 1.0 A
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRCW0201
Rated Dissipation at 70 °C ⁽¹⁾
W
0.05
Operating Voltage U_max. AC_RMS/DC
V
Insulation Voltage U_ins (1 min)
V
Insulation Resistance

30
50
> 10⁹
Operating Temperature Range
°C
- 55 to + 155
Weight/1000 Pieces
mg
0.17
Note
(1) _{The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
Revision: 06-Jun-12
1
Document Number: 20052
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000