CRCW-HP-E3 Datasheet, PDF (1/10 Pages) Vishay Siliconix – Pulse Proof, High Power Thick Film Chip Resistors

www.vishay.com
CRCW-HP e3
Vishay Draloric
Pulse Proof, High Power Thick Film Chip Resistors
FEATURES
• Excellent pulse load capability
• Enhanced power rating
• Double side printed resistor element
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The pulse proof, high power thick film chip resistors series
is the perfect choice for most fields of power measurement
electronics where reliability, stability, high power rating and
excellent pulse load performance are of major concern.
Typical applications include battery management systems
in automotive appliances.
APPLICATIONS
• Automotive
• Industrial
TECHNICAL SPECIFICATIONS
DESCRIPTION
CRCW0402- CRCW0603- CRCW0805- CRCW1206- CRCW1210- CRCW1218- CRCW2010- CRCW2512-
HP e3
HP e3
HP e3
HP e3
HP e3
HP e3
HP e3
HP e3
Imperial size
0402
0603
0805
1206
1210
1218
2010
2512
Metric size code
RR1005M RR1608M RR2012M RR3216M RR3225M RR3246M RR5025M RR6332M
Resistance range
1  to 1 M jumper (0)
Resistance tolerance
± 5 %; ± 1 %; ± 0.5 %
Temperature coefficient
± 200 ppm/K; ± 100 ppm/K
Rated dissipation, P₇₀ ⁽¹⁾
Operating voltage,
U_max. AC_RMS/DC
Permissible film
temperature, _{F max.} ⁽¹⁾
Operating temperature
range
0.2 W ⁽²⁾
50 V
0.25 W
75 V
0.5 W
150 V
0.75 W ⁽³⁾
200 V
0.75 W
200 V
155 °C
-55 °C to +155 °C
1.5 W
200 V
1.0 W
400 V
1.5 W
500 V
Max. resistance change
at P₇₀ for resistance
range, |R/R| after:
1000 h
 2.0 %
8000 h
 4.0 %
Permissible voltage
against ambient
(insulation):
1 min, U_ins
75 V
100 V
200 V
300 V
300 V
300 V
300 V
300 V
Notes
• Marking: See document “Surface Mount Resistor Marking” (www.vishay.com/doc?20020).
(1) _{Please refer to APPLICATION INFORMATION below.}
(2) _{CRCW0402-HP resistors feature a single side printed resistive layer only.}
(3) _{Specified power rating requires a thermal resistance of Rth = 110 K/W.}
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 16-Sep-16
1
Document Number: 20043
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000