CRA06S083100RJTA Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Resistor Array

CRA06E, CRA06S
Vishay
Thick Film Resistor Array
CRA06E and CRA06S Thick Film resistor arrays are
constructed on a high grade ceramic body with convex
terminations. A small package enables the design of high
density circuits. The single component reduces board space,
component counts and assembly costs.
FEATURES
• Convex terminal array available with either
scalloped corners (E version) or square corners
(S version)
• Wide ohmic range: 10R to 1M0
• 4 or 8 terminal package with isolated resistors
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with Lead (Pb)-free
and lead containing soldering processes
• Compatible with "Restriction of the use of Hazardous
Substances" (RoHS) directive 2002/95/EC (issue 2004)
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CIRCUIT
POWER RATING LIMITING ELEMENT TEMPERATURE
P_{70 °C}
VOLTAGE MAX.
COEFFICIENT
W
V≅
ppm/K
CRA06E
CRA06S
0.063
50
± 100
03
± 200
Zero-Ohm-Resistor available; R_max. = 50 mΩ, I_max. = 1 A
TOLERANCE
%
±1
± 2; ± 5
RESISTANCE
RANGE
Ω
10R - 1M0
E-SERIES
24 + 96
24
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
CRA06E & S
Rated Dissipation at 70 °C ⁽²⁾
Limiting Element Voltage ⁽¹⁾
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
W per element
V≅
V_{dc/ac peak}
°C
Ω
0.063
50
100
- 55 to + 155
> 10⁹
Notes
(1) _{Rated voltage: P × R}
(2) _{The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rates dissipation applies only if the permitted film temperature of 155 °C is not exceed.
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: CRA06S08347K0JTA ⁽³⁾
CRA0 6 S 0 8 3 4 7 K 0 J TA
MODEL
TERMINAL STYLE
PIN
CRA06
S
04
E
08
CIRCUIT
3 = 03
PRODUCT DESCRIPTION: CRA06S 08 03 473 J RT1 e3
CRA06S
08
03
VALUE
R = Decimal
K = Thousand
M = Million
0000 = 0 Ω Jumper
473
TOLERANCE
F=±1%
G=±2%
J=±5%
Z = 0 Ω Jumper
PACKAGING ⁽⁴⁾
TA
TC
SPECIAL
Up to 2 digits
J
RT1
e3
MODEL
CRA06S
CRA06E
TERMINAL COUNT
04
08
CIRCUIT TYPE
03
RESISTANCE VALUE
473 = 47 kΩ
4702 = 47 kΩ
10R0 = 10 Ω
100 = 10 Ω
000 = 0 Ω Jumper
First two digits (3 for 1 %)
are significant. Last
digit is the multiplier.
TOLERANCE
F=±1%
G=±2%
J=±5%
Z = 0 Ω Jumper
PACKAGING ⁽⁴⁾ LEAD (Pb)-FREE
RT1
e3 = Pure tin
RT6
Termination finish
Notes
(3) _{Preferred way for ordering products is by use of the PART NUMBER}
(4) _{Please refer to table PACKAGING, see next page}
www.vishay.com
252
For technical questions, contact: [e-mail]
Document Number: 31002
Revision: 13-Oct-08