CRA06P_08 Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film Resistor Array

CRA06P
Vishay
Thick Film Resistor Array
CRA06P Thick Film resistor array is constructed on a high
grade ceramic body with concave terminations. A small
package enables the design of high density circuits. The
single component reduces board space, component counts
and assembly costs.
FEATURES
• Concave terminal array with square corners
• 4 and 8 terminal package with isolated resistors
• Wide ohmic range: 10R to 1M0
• Lead (Pb)-free solder contacts on Ni barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible with "Restriction of the use of Hazardous
Substances" (RoHS) directive 2002/95/EC (issue 2004)
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CRA06P
CIRCUIT
03
POWER RATING LIMITING ELEMENT TEMPERATURE
P_{70 °C}
W
VOLTAGE MAX.
V≅
COEFFICIENT
ppm/K
± 100
0.063
50
± 200
Zero-Ohm-Resistor: R_max. = 50 mΩ, I_max. = 1 A
TOLERANCE
%
±1
± 2; ± 5
RESISTANCE
RANGE
Ω
10R - 1M0
E-SERIES
24 + 96
24
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation at 70 °C ⁽²⁾
Limiting Element Voltage ⁽¹⁾
UNIT
W per element
V≅
CRA06P
03 CIRCUIT
0.063
50
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
V_{dc/ac peak}
°C
Ω
100
- 55 to + 155
> 10⁹
Notes
(1) _{Rated voltage: P × R}
(2) _{The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the}
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESPRIPTION
PART NUMBER: CRA06P08347K0JTA ⁽³⁾
CRA0 6 P 0 8 3 4 7K0 J TA
MODEL TERMINAL STYLE PIN CIRCUIT
VALUE
CRA06
P
04
3 = 03
R = Decimal
08
K = Thousand
M = Million
0000 = 0 Ω Jumper
PRODUCT DESCRIPTION: CRA06P 08 03 473 J RT1 e3
CRA06P
08
03
473
MODEL
CRA06P
TERMINAL COUNT
04
08
CIRCUIT TYPE
03
RESISTANCE VALUE
473 = 47 kΩ
4702 = 47 kΩ
10R0 = 10 Ω
100 = 10 Ω
000 = 0 Ω Jumper
First two digits (3 for 1 %)
are significant. Last digit
is the multiplier.
Notes
(3) _{Preferred way for ordering products is by use of the PART NUMBER}
(4) _{Please refer to the table PACKAGING, see next page}
TOLERANCE
F=±1%
G=±2%
J=±5%
Z = 0 Ω Jumper
J
TOLERANCE
F=±1%
G=±2%
J=±5%
Z = 0 Ω Jumper
PACKAGING ⁽⁴⁾
TA
TC
SPECIAL
Up to 2 digits
RT1
e3
PACKAGING ⁽⁴⁾
RT1
RT6
LEAD (Pb)-FREE
e3 = Pure tin
Termination finish
www.vishay.com
256
For technical questions, contact: [e-mail]
Document Number: 31047
Revision: 13-Oct-08