CRA04P Datasheet, PDF (1/4 Pages) Vishay Siliconix – Thick Film, Resistor Array

Thick Film, Resistor Array
CRA04P
Vishay
The CRA04P thick film resistor array is constructed on a high
grade ceramic body with concave terminations. A small
package enables the design of high density circuits. The
single component reduces board space, component counts
and assembly costs.
FEATURES
• Concave terminal array with square corners
• Wide ohmic range: 1R0 to 1M0
• 8 terminal package with isolated resistors
• Lead (Pb)-free solder contacts on NI barrier layer
• Pure tin plating provides compatibility with lead (Pb)-free
and lead containing soldering processes
• Compatible with “Restriction of the use of Hazardous
Substances” (RoHS) directive 2002/95/EC (issue 2004)
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING LIMITING ELEMENT
MODEL CIRCUIT
P_{70 °C}
W
VOLTAGE MAX
V≅
TEMPERATURE
COEFFICIENT
ppm/K
0.063
50
CRA04P 03
± 100
± 200
Zero-Ohm-Resistor: R_max = 50 mΩ, I_max = 1 A
TOLERANCE
%
±2
±5
RESISTANCE
RANGE
Ω
10R - 1M0
1R0 - 1M0
E-SERIES
24
24
TECHNICAL SPECIFICATIONS
PARAMETER
Rated Dissipation at 70 °C²⁾
Limiting Element Voltage¹⁾
Insulation Voltage (1 min)
Category Temperature Range
Insulation Resistance
UNIT
W per element
V≅
V_{dc/ac peak}
°C
Ω
CRA04P
0.063
50
100
- 55/+ 125 (+ 155)
> 10⁹
Notes
1. Rated voltage: P × R
2. The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 °C is not exceeded.
PART NUMBER AND PRODUCT DESPRIPTION
PART NUMBER: CRA04P08347K0JTD¹⁾
CRA0 4 P 0 8 3 4 7K0 J TD
MODEL TERMINAL STYLE PIN CIRCUIT
VALUE
CRA04
P
08
3 = 03
R = Decimal
K = Thousand
M = Million
0000 = 0 Ω Jumper
PRODUCT DESCRIPTION: CRA04P 08 03 473 J RT7 e3
CRA04P
08
03
473
MODEL
CRA04P
TERMINAL COUNT
08
CIRCUIT TYPE
03
RESISTANCE VALUE
473 = 47 kΩ
4R7 = 4.7 Ω
100 = 10 Ω
000 = 0 Ω Jumper
First two digits (3 for 1 %)
are significant. Last digit
is the multiplier.
Notes
1. Preferred way for ordering products is by use of the PART NUMBER.
2. Please refer to the table PACKAGING, see next page.
TOLERANCE
G=±2%
J=±5%
Z = 0 Ω Jumper
J
TOLERANCE
G=±2%
J=±5%
Z = 0 Ω Jumper
PACKAGING²⁾
TD
TC
PZ
SPECIAL
up to 2 digits
RT7
PACKAGING²⁾
RT7
RT6
PZ
e3
LEAD (Pb)-FREE
e3 = Pure Tin
Termination Finish
Document Number: 31048
Revision: 09-Jan-07
For Technical Questions contact: [e-mail]
www.vishay.com
1