|
CDR32BP621BFURAJ Datasheet, PDF (1/12 Pages) Vishay Siliconix – Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type CDR | |||
|
CDR-MIL-PRF-55681
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
MIL Qualified, Type CDR
FEATURES
⢠Military qualified products
⢠Federal stock control number,
CAGE CODE SHV71
⢠High reliability tested per MIL-PRF-55681
⢠Tin/lead termination codes âZâ and âUâ
⢠Lead (Pb)-free termination codes âWâ, âYâ, âMâ
⢠Wet build process
⢠Reliable Noble Metal Electrode (NME) system
⢠Compliant to RoHS Directive 2002/95/EC
⢠Halogen-free according to IEC 61249-2-21 definition
APPLICATIONS
⢠Avionic systems
⢠Sonar systems
⢠Satellite systems
⢠Missiles applications
⢠Geographical information systems
⢠Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
⢠Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 1.0 pF to 470 nF
Voltage Range: 50 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C,
with 0 VDC applied
BX: ± 15 % from - 55 °C to + 125 °C,
with 0 VDC applied
BX: + 15 %, - 25 % from - 55 °C to + 125 °C,
with 100 % rated VDC applied
Dissipation Factor (DF):
BP: 0.15 % maximum
BX: 2.50 % maximum
Test frequency:
1 MHz ± 50 kHz for BP capacitors ï£ 1000 pF
and for BX capacitors ï£ 100 pF
All other BP and BX at 1 kHz ± 50 Hz
Aging Rate:
BP: 0 % maximum per decade
BX: 1 % maximum per decade
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 Mï minimum or
1000 ïF, whichever is less
Dielectric Strength Test:
Performed per method 103 of EIA-198-2-E
Applied test voltages:
ï£ 100 VDC-rated: 250 % of rated voltage
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 45026
Revision: 30-May-11
For technical questions, contact: mlcc@vishay.com
www.vishay.com
165
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |