English
Language : 

CC8 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thin Film 0202 Size Resistor on Alumina
www.vishay.com
CC8
Vishay Electro-Films
Thin Film 0202 Size Resistor on Alumina
Product may not be to scale
The CC8 series resistor chips offer a combination of low
shunt capacitance, small size and excellent stability.
The CC8s are manufactured using Vishay Electro-Films (EFI)
sophisticated thin film equipment and manufacturing
technology. The CC8s are 100 % electrically tested and
visually inspected to MIL-STD-883, class H or class K.
FEATURES
• Chip size: 0.020 inches square
• Wire bondable
• Resistance range: 20  to 20 k
• Alumina substrate
• Case: 0202
• Low stray capacitance: < 0.2 pF
• Resistor material: Nichrome with passivation
coat
• Tolerances to 0.5 %
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Vishay EFI CC8 chip resistors
high-frequency response and are
prototyping. 
Typical application areas are:
provide excellent
ideally suited for
• Amplifiers
• Oscillators
• Attenuators
• Couplers
• Filters
Recommended for hermetic environment where die is not
exposed to moisture.
TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES
PARAMETER
VALUE
Total Resistance Range
20 to 20K
Standard Tolerances
± 0.5
TCR
± 25, ± 50, ± 100
UNIT

%
ppm/°C
Tightest Standard Tolerance Available
0.5 %
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
20 Ω
50 Ω
STANDARD ELECTRICAL SPECIFICATIONS
PARAMETER
Noise, MIL-STD-202, Method 308
Moisture Resistance, MIL-STD-202
Method 106 (Passivated Film)
Stability, 1000 h, + 125 °C, 25 mW
Operating Temperature Range
Thermal Shock, MIL-STD-202, Method 107, Test Condition F
High Temperature Exposure, + 150 °C, 1000 h
Dielectric Voltage Breakdown
Insulation Resistance
Operating Voltage
DC Power Rating at + 70 °C (Derated to zero at + 150 °C)
5 x Rated Power Short-Time Overload, + 25 °C, 5 s
5.1 kΩ
20 kΩ
VALUE
- 20 dB typ.
± 0.5 max. R/R
± 0.2 max. R/R
- 55 to + 125
± 0.25 max. R/R
± 0.5 max. R/R
400
1012 min.
100 max.
0.035 max.
± 0.25 max. R/R
UNIT
dB
%
%
°C
%
%
V

V
W
%
Revision: 05-Apr-13
1
Document Number: 61007
For technical questions, contact: efi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000